Primary tabs

ssa.prod@coep.ac.in

ssa.prod@coep.ac.in's picture

Faculty

SANDIP SHARADRAO ANASANE

Designation: 

Assistant Professor

Department: 

Production & Industrial Management

Email: 

ssa.prod@coep.ac.in

Phone Number: 

+91-20-25507364

Teaching Experience: 

16

Industry Experience: 

2

Research Experience: 

2

Qualifications: 

B.E. (Production Engineering)

M.E. (Production Engineering)

Ph.D. (Production Engineering)  

Teaching Responsibility: 

MANUFACTURING ENGINEERING-I

PRODUCT DESIGN FOR MANUFACTURING AND ASSEMBLY

METROLOGY AND QUALITY CONTROL

 

Additional Responsibility: 

COEP FAB LAB

Publications: 

Prof. S.S. Anasane Publications Details

 

Conferences

 

Sr.

No.

Title of the Paper

Authors

Publication Details

National/

International  

01

Rapid Prototyping in Biomedical engineering

Anasane S.S.,

Ingole D.S.

National Conference on Rapid Prototyping, March 2005,at VNIT,Nagpur

National

02

Total Knee Prosthesis: Design, Manufacture, and Testing

Anasane S.S.,Pandey A.Rathi .,    Ravi B.

TEAMTECH-2007 conference, Bangalore

International

03

Geometry driven decision support system for knee tumour mega endo-prosthesis componenets selection

K. Subburaj, P. Suresh, S.S. Anasane,  B. Ravi, M.G. Agarwal

Proceedings of BioMed2008

Frontiers of Biomedical Devices Conference

June 18-20, 2008, Irvine, California, USA, BIOMED2008-38035

International

04

Static and dynamic analysis of Tumor knee prosthesis

Ghyar Rupesh,

Anasane S.S.,

Ravi B.

Altair Hyperworks Technology  Conference- July 31 - August 2, 2008, Bangalore

International

05

Feasibility Study of Electro Discharge Machining Electrodes Fabricated with Rapid Prototyping Process Using Fused Deposition Modeling

Pawar Pravin A. 2 Anasane Sandip S.

4th International & 25th AIMTDR Conference held in Production Engineering Department, Jadavpur University, Kolkata. December 14-16, 2012, Page No.637-642, Vol-I Proceedings of 4th International & 25th AIMTDR Conference

International

06

Experimental Investigation of Electroless Cu Coated electrode Fabricated with FDM Rapid Prototyping Technique for Electro Discharge Machining

Pawar Pravin A. and Anasane Sandip S.

International Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING (COPEN-8: 2013)

December 13th-15th, 2013, NIT Calicut, Kerala, India, Proceedings of   Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING (COPEN-8: 2013)-Vol-II, Page No. 639-645

International

07

Experimental Research Based on Review for Micromachining of Titanium by Anodic Dissolution Technique

Sandip S. Anasane and B. Bhattacharyya

International Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING (COPEN-8: 2013)

December 13th-15th, 2013, NIT Calicut, Kerala, India, Proceedings of   Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING (COPEN-8: 2013)-Vol-I, Page No. 127-132

International

08

Experimental study of electroless copper coated on ABS Material used for tooling in EDM machining process

Sandip S. Anasane and B. Bhattacharyya

5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th, 2014, IIT

Guwahati, Assam, India, page-234-1 to 234-6

International

09

Analysis of Micro Hole Machining on Titanium by Electrochemical Micromachining Process

Sandip S. Anasane and B. Bhattacharyya

International Conference on Advances in Civil and Mechanical Engineering Systems, 23-24 Dec.2014

Government College of Engineering, Amravati in association with SVNIT, Surat, India, Vol-II, page no.112-118

International

10

Fabrication of Microslots on Titanium By Electrochemical Micromachining,

Sandip S. Anasane and B. Bhattacharyya

International Conference on PRECISION,             MESO, MICRO AND NANO ENGINEERING (COPEN-9: 2015) December 10-    12, 2015, IIT, Bombay, Powai Mumbai  

International

11

Investigations into micro hole generation on titanium by Electrochemical Micromachining using Conical Disc Microtool

Sandip S. Anasane and B. Bhattacharyya

6th International and 27th All India Manufacturing  Technology, Design and  Research Conference, AIMTDR 2016,  December 16-18, 2016, College of Engineering, Pune

International

 

 

Journals

 

Sr.

No.

Title of the Paper

Authors

Publication Details

National/

International  

01

Finite Element Analysis Of Modified Hip Prosthesis

Shinge Abhijit Anasane S.S

International Journal of Advanced Biotechnology and Research ISSN 0976-2612, Vol 2, Issue 2, June-2011, pp-278-285

International

02

Experimental investigation on suitability of electrolytes for electrochemical Micromachining of titanium

Sandip S. Anasane and B. Bhattacharyya

The International Journal of Advanced Manufacturing Technology (2016) 86:2147–2160 Springer-Verlag London 2016

International

03

Experimental investigation into fabrication of microfeatures on titanium by electrochemical micromachining

Sandip S. Anasane and B. Bhattacharyya

Advances in Manufacturing (Springer) (2016) 4:167-177.

International

04

Investigation on micromilling of through microslots on titanium by electrochemical micromachining

Sandip S. Anasane and B. Bhattacharyya

Int. J. Precision Technology, Vol. 6, Nos. 3/4, 2016, 231-247 (Inderscience)

International

05 Experimental study of electroless copper coated on ABS Material used for tooling in EDM machining process Pawar, P., Anasane, S.S. Journal of Production Engineering, JPE (2016) Vol.19 (2) 27-32 International
06 Experimental investigation into micromilling of microgrooves ontitanium by electrochemical micromachining Sandip S. Anasane and B. Bhattacharyya Journal of Manufacturing Processes 28 (2017) 285–294 (Elsevier) International

 

 

 

 

 

Book Chapters

  1. S.S. Anasane and B. Bhattacharyya, “Electrochemical Micromachining of Titanium and Its Alloys” In: Non-traditional Micromachining Processes Fundamentals and Applications, Golam Kibria B. Bhattacharyya J. Paulo Davim (eds.), 2017 ISSN 2195-0911 Springer International Publishing.

 

       2.S. Debnath, S. Kunar, S.S. Anasane and B. Bhattacharyya, “Non-traditional Micromachining             Processes: Opportunities and Challenges,” In: Non-traditional Micromachining Processes                   Fundamentals and Applications, Golam Kibria B. Bhattacharyya J. Paulo Davim (eds.), 2017             ISSN 2195-0911 Springer International Publishing.

Sponsored Research Projects

 

 

Sr.

No.

Title of the Project

Name of PI/Co-PI

Sponsoring Agency

Ammount  

Year of sanction

01

Fabrication Of Electro Discharge Machining Electrodes By Rapid Tooling With Application Of FDM Rapid Prototyping Process

    S.S.Anasane

     AICTE-RPS

    21.00 Lakh

   2013

02

Biomedical Engineering Technology Incubation Centre (BETiC)

   S.S.Anasane

   (Co-Investigator)

   RGST-Govt. Of           Maharashtra

     250 Lakh

     2014

 

Awards:

Best paper presentation award at, International Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING (COPEN-9: 2015) December 10-12, 2015, IIT, Bombay, Powai Mumbai

 

 

 

Memberships and Affiliations: 

AMIE

@ 2016 COEP. All Rights Reserved. Site Developed By COEP Webteam.

© 2016 College of Engineering Pune. All rights reserved