sns.mech@coep.ac.in

Faculty

 

Dr. Shivalingappa Nagappa Sapali
 

Designation: 

Professor

Department: 

Mechanical

Email: 

sns.mech@coep.ac.in

Phone Number: 

020-25507224

Website: 

www.coep.org.in

Teaching Experience: 

30

Research Experience: 

18

Qualifications: 

1. PhD-Cryogenic Air Separation Technology from IIT Kharagpur, 2002
2. M E. (Mech Engg) , College of Engineering Karad-1992
3. B E (Mech Engg) 1985

 

Awards

 

1. Best paper award for the paper presentation in 25^th National seminar on Industrial Gases, held at Pune in 2003.

2. Appreciation certificate from Director, COE Pune in 2004.

3. Appreciation certificate from Emerson Climate Technologies Ltd, Karad 2008.

4. 2012, International Conference on Power and Energy Engineering, Phuket, Thialand, Best oral presentation, of the paper “simulation of Biomass gasification with Oxygen/air as gasifying agent by Aspen Plus P00063”. Best Teacher Award from Govt of Maharashtra in the academic year 2012-13

5. Appreciation certificate for valuable contribution as Program Chair, 3^rd Annual International Simulation Conference of India, 11^th and 12^th January 2014

I. CONTRIBUTION AT INTERNATIONAL LEVEL

 

• Reviewer for the research papers of International Conference HEFAT 2006 ad 2007

• Presented a research paper in 5^th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Sun City, South Africa, July 1-4, 2007.

• Presented a research paper in world congress on Engineering 2011 held during, July 6-8, 2011 at Imperial College London, UK.

• Reviewer for the International Journal Experimental, Thermal and Fluid sciences , Elsevier Publication, 2011

• Worked as Session Chair at ASME International Mechanical Engineering Congress and Exposition 2014, November 14-20, 2014, Montreal, Canada for following four sessions,

• 1-11-2 Turbine and Blade Aerodynamics and Performance II

• 7-21-2 Wind Turbine Modeling

• 7-21-3 Wind Farm Optimization

• 7-26-1 Carbon Capture

• Delivered a Keynote Speech at International Conference on Energy Systems and Developments (ICESD 2015), Pune, India, 11-13^th February 2015

II. CONTRIBUTION AT NATIONAL LEVEL

 

• Chairman and member of expert committees for opening new MBA, MCA, Pharmacy and Engineering Institutes under AICTE New Delhi.

• Keynote speaker for many national conferences in India.

• Consultant for cold storages of NHB, Ministry of Agriculture, New Delhi.

• Member of NBA committee

III, STATE LEVEL

1. Chairman Board of Studies of Mechanical Engineering, at COEP during July 2012 to June 2015

2. Member of Board of Studies of Mechanical Engineering Pune university, Pune

3. Member of Board of Studies of Mechanical Engineering Shivaji university, Kolhapur

4. Member of Board of Studies of Mechanical Engineering Solapur university, Solapur

5. Session chairman for the technical sessions of National Conferences

6. Examiner for the project competition

Teaching Responsibility: 

Teaching UG, PG and PhD students

Significant Contribution to Teaching
UG Teaching	Year and Branch	How many times
Engg Graphics, BME	First year	05
M/C Drawing	S.E. (Mech)	04
Numerical Methods	S.E. (Mech)	02
Thermodynamics	S.E. (Mech)	02
MQC	T.E (Mech)	01
Heat Transfer	T.E (Mech)	10
RAC,	BE (Mech)	04
Numerical Methods & Compt. Tech,	BE (Mech)	04
Control System	BE (Mech)	02
Operational research	BE (Mech)	02
CAD/CAM	TE (Mech)	02
PG Teaching 1991-2008	Year and Branch	How many times
Ad. Heat Transfer	M.E. Mech	05
Numerical Methods & Compt. Tech	M.E. Mech	05
Measurement Techniques	M.E. Mech	02
Advanced Thermodynamics	M.E. Mech	04
Air conditioning system design	M.E. Mech	05

Additional Responsibility: 

Coordinator, QIP Center, COEP

Out Reach activities

1. As a member of an NBA committee for many Colleges in India since 2009-2016.

2. As a member of State level admission committee to conduct the entrance test, carry out the admissions through CAP for the academic year 2013-14

3. Working as a coordinator for QIP center at COEP since 2012-13

4. As a session chair, “World congress on Engineering and Computer science 2013, at San Francisco, USA, 23-25, 2013.

5. Worked as a convener for the international conference on Advances in Mechanical Engineering , as a part of centenary celebrations, 29,30 and 31 May 2012

6. As a reviewer for the research paper to be published in international conference HEFAT 2007 and 2006.

7. Chairman to make admission for MCA, during the academic year 2002-03, at Karad.

Chairman of inspection committees for new Institutions like Engineering, Pharmacy, MBA and MCA, number

1. of times since from 2003-2011 at State level as well as national level.

2. Officer in charge for university examinations and competitive examinations at COE Pune, and Karad.

3. Joint Organizing secretary, for national Conference on Energy and Fuel Issues of Future, November 5-6, 2004.

4. Conducted mock interview of teaching staff of production department of WIT Solapur to make oneself prepared to face NBA committee, November 2004.

5. As a coordinator for MBA and MCA admissions for the academic year 2005-06, 2006-07 and 2007-08..

6. As a Core Committee member for F.Y B.Tech admission of autonomous institutes for the academic year 2005-06.

7. Chairman for a technical session in the national conferences in India and abroad.

8. Worked as a Subject Expert for the interviews of Lecturer, Assistant professor, Professor of Mechanical Engineering Deptt, College of Engineering, in Pune university area.

Participation/conduction in a Continuing Education Programme 2 day Brain storming Workshop of Heads of Educational Institutes on Key Issus of Higher Technical Education, ABV –IIITM Gwalior, 27-28th August 2015   Two days workshop on NBA experts/evaluators, February 19-20,2013 at Jaypur,Rajasthan   Two days workshop on Administrative improvement in autonomous institute, throughTEQIP-II at IIM Indore, December 14-16, 2012. Coordinator and a resource person for one week STTP on “Advances in Refrigeration and Cryogenic Air Separation”, held at COEP, Pune During November 17-22, 2008. Coordinator and a resource person for one day workshop on “Cryogenics”, held at RIT, Sakharale on 2nd April 2007. Organized one week short-term course on “Cooling Load Estimation and duct Design of an Air Conditioning System” COE, Pune during June 13-18, 2005. Organized two days workshop on “Environment Friendly Refrigeration and Cryogenics” COE, Pune during January 13-14, 2006.

Conducted one-day workshop for restructuring the syllabus of BE (Mechanical) at Govt. COE, Karad on August 24, 2002. I have represented the college invited talk on “Introduction to cryogenic air separation” to the staff and students of KBP College of Engineering, Satara TKIET College of Engineering, Waranagar College of Engineering, Pandharpur Modern College of Engineering, Pune. Expert lecture on Global Warming and Ozone friendly Refrigerants, at GCOE Amarawati, August 8, 2009. A key-note speaker and resource person for the one-day seminar on Cryogenic Applications at PDA College of Engineering, Gulberga, June 9, 2004. As a resource person in the two week STTP at PVPIT College of Engineering, Budhagaon, Sangli, June 23, 2004. As a resource person in the two week STTP Computational Fluid Mechanics and Heat Transfer of Mechanical Engineering at Govt. COE, Pune, January 14, 2005. As a session chairman for the national conference at College of Engineering, Kopargaon, July 21-22, 2004. As a resource person in the two week STTP on Recent Trends in Refrigeration and Air Conditioning, at Sinhgad College of Engineering, Pune, November 7-19, 2005. One day workshop in association with ONWARD TECHNOLOGY Pune , on RAPID PRODUCT DEVELOPMENT,, January 5, 2013. One day workshop in association with ONWARD TECHNOLOGY Pune , on SPEED TO MARKET:NEW PRODUCT DEVELOPMENT TECHNIQUES”, March 9, 2013.

As a resource person for one day seminar on Cryogenics at DKTE’s College of Engineering, Ichalkaranji on 19th March 2006. As a coordinator and a resource person for one day workshop on Cryogenics at RIT College of Engineering, Sakharale, on 2nd April 2007.

Other Academic Contributions Obtained a sanction of Rs 2.5 lakhs for a PhD on going project in year 2016 from SMART ENERGY center, COEP Obtained a sanction of Rs 2 lakhs for a PhD on going project in year 2016 from Alumni Association of COEP Submitted a proposal for Rs 55 lakhs to AICTE New Delhi in December 2015 for funding to QIP center, COEP Obtained a sanction of Rs 17.26 lakhs for DESIGN AND DEVELOPMENT OF CO-AXIAL SERIES-ROTOR under RPS scheme of AICTE New Delhi in the year 2013 at COEP, Pune. Obtained a sanction of Rs 4.5 lakhs for the modernization of refrigeration and air conditioning laboratory under MODROB scheme of AICTE New Delhi in the year 2003 at Karad. Obtained a sanction of Rs 5 lakhs for cryogenic laboratory under TAPTEC scheme of AICTE New Delhi in the year 2003 at Karad.

Obtained a sanction of Rs 7.4 lakhs for cryogenic laboratory under RPS scheme of AICTE New Delhi in the year 2004 at PIET, Pune. Obtained a sanction of Rs 1.5 lakhs for PhD on going project in the year 2008 from Pune University, Pune.

Consultancy Projects Completed/ongoing   Design of Discharge Muffler of a hermetic compressor, Kirloskar Copeland Ltd, Karad Pressure drop in water filter, Flash Equipment (P) Ltd, Pune Design Verification of Hydraulic Cylinder, Kasco Industries, Pune Heat transfer in a rectangular channels with Micro-fin, Tata Toyo (P) Ltd, Pune. Designed and developed a metallic joint for joining the fractured bones as required by Krishna Medical Science and Research Center, Karad, 1988. Consultancy work completed from Mr. T. Vasu, Bajaj Tempo Ltd., Pune Consultancy work on improvement of boiler efficiency, Forbes Marshall, Pune completed, 2005.

Consultancy work on cold cabinet , Animal hasbandary, completed, 2009. Consultancy work on centrifugal pump, Alfa Lawal, Pune, 2009. Consultancy work to determine the performance curves, Talab Engineering, Pune, 2009. Consultancy work of Whirlpool India Ltd, Pune, August 2009. Consultant for Cold storages of National Horticulture Board, 2010 -15. Consultancy to Animal Husbandry department, Govt of Maharashtra, 2012 to 2015. Musta Refrigeration engineers Pvt Ltd “CFD analysis of Self Cleaning Filter”, 2015.

 

Outreach   Guided number of students to present the seminar on technical topics in the national level seminar competition. Number of times, students won the prizes.

Recommended to students who have gotten admissions for PG courses outside India Name of the students: (1) Agarwal 03-04, (2) Sane 03-04, (3) Rahul Kulkarni, June-04, (5) Joshi 2005-06. . (6) Rohan Gumaste, 2007-08. (7) Mr. Neeraj Chirmulay 2008-09.

Worked as a judge for paper presentation competition of AAVISHKAR at COE, Karad during 2002-03 and for AAVISHKAR 2005-06.

Worked as a judge for paper presentation competition at KIT Kolhapur during 2002-03 and 2005-06.

Worked as a judge for paper presentation competition of at GP Pune during 2004-05.

Worked as a judge for project presentation competition of at College of Engineering, Ambejogai during 2008-09.

Worked as a judge for paper presentation competition of at JSPM College of Engineering, Balewadi, Pune during 2008-09.

 

Publications: 

Research Papers:International Journal: 8
National Journal:03
International Conferences: 15
National Conference: 10
Books: Refrigeration and Air Conditioning, PHI Publication, New Delhi

Guidance to PhD Thesis (Completed)

Design Development and Performance Evaluation of hermetic compressor using R410a refrigerant blend for Air Conditioning Application by A A Keste , Condensation of HFC-134a and R-404A in a Smooth and Micro-fin Tube, by P A Patil. Characterization of components of air-conditioning system of a car” by A D Desai. Dynamic modelling exergy analysis and model validation by experimentation of milk chiller submitted BY: Mr. /Ms. GHEWADE DINKAR VISHNU Cryogenic air separation Plants: Simulation, design and Exergy Analysis, Mr Raibhole V N. Design, manufacture and Experimental Analysis of a centrifugal pump of low specific speed and optimization and validation of result by CFD. “Design and Development of Micro Wind Turbine” submitted by Kale S. A. Waste heat recovery in a bulk milk chiller, by S M Pise

Four candidates till working for their PhD under my supervision

	INTERNATIONAL JOURNAL PUBLICATIONS
	CFD Analysis of Heat Transfer in Reciprocating Helical Coil with Piston Cooling Application, International Review of Mechanical Engineering, Italy, September 2007.
	Condensation of R-134a in a Multi Flow Channel Aluminum Flat Condenser with Micro-fins, International Review of Mechanical Engineering, Italy, November 2007.
	“Two-Phase Condensation Heat Transfer Coefficients and Pressure Drops Of Hfc-134a for Different Condensing Temperatures In a Smooth and Micro-Fin Tube” IJERIA, August 2009.
	Optimization of Mach number for Suction and Discharge Port Areas of the Valve Plate of Hermetic Compressor Using R-410A Refrigerant Blend for A/C Application” international journal International Review of Mechanical Engineering, Italy, January 2010.
	Heat Transfer During Condensation of Hfc-134a and R-404a Inside Of A Horizontal Smooth And Micro-Fin Tube, accepted, Elseevier-International journal of Experimental Thermal and Fluid science, March 2010.
	Air Flow and Cabin static Pressure measuremet od a/c system of a medium size passenger car, international journal International Review of Mechanical Engineering, Italy, November 2010.
	Experimental optimization of charge level in an automotive air conditioning system under steady state conditions, Society of Automotive Engineers, Brazil, SAE Paper No. 2010-36-18J, Accepted
	Experimental Characterisation of condenser of an automotive A/C system under steady state condition, International Journal of Multidisciplinary Research and Advances in Engineering, ISSN 0975-7074, vol. 2, No III, PP 139-154, October 2010
	“Simulation of oxygen plant for biomass Gasification application by Aspen Plus” International Journal of Earth Science and Engineering [ISSN: 0974-5904],Volume 5 spl, pp 415-419, January 2012.
	comprehensive evaluation of innovative multi rotor wind turbine designs”, International Journal of Mechanical Engineering and Technology (IJMET), Volume 3, Issue 2, May-August (2012)
	Performance analysis of Centrifugal Pumps Impeller of Low specific speed of various blades design and validation of results by CFD” IJJCE (Mech Engg) USA, May 2012.
	Experimental analysis of Centrifugal Pumps Impeller of various materials and validation of results by CFD” ISME (Turbo-machine) USA, July 2012.
	Simulation of Medium Purity gaseous oxygen cryogenic plant for biomass gasification by Aspen Plus, International Review of Mechanical Engineering, September 2012, (Vol. 6 N.6)
	Exergy Flow Analysis in Semielliptical Rectangular Bulk Milk Cooler, International Review of Mechanical Engineering, November 2012, (Vol. 6 N. 7)
	On this work one paper is published with title as “Simulation of medium purity gaseous oxygen cryogenic plant for biomass gasification by Aspen Plus” Published in IREME, Italy, Vol. 6, No. 6, September-2012 [ IF: 6.47]
	Paper on “ Simulation and Parametric analysis of cryogenic oxygen plant for biomass gasification”, Published for Mechanical Engineering Research, Vol.2 No.2, November, 2012, pp.97-107, ISSN: 1927-0607, Canadian center of Science and Engineering, Canada. [DOI- 10.5539/mer.v2n2p97].
	S.A. Kale, S.N. Sapali, “Development and Field Test Performance of a Nonconventional Unidirectional Co-Axial Two Series Rotors Micro Wind Turbine”, Volume 768, ‘Energy Efficient Technologies for Sustainability’ in Advanced Materials Research, Print ISSN No.:1022-6680, (Switzerland) (Indexed by Elsevier: SCOPUS and Ei-Compendex (CPX), Cambridge Scientific Abstracts) doi:10.4028/www.scientific.net/AMR.768.119, 2013
	S.A. Kale, S.N. Sapali, “A review of multi-rotor wind turbine systems”, Journal of Sustainable Manufacturing and Renewable Energy, Volume 2 Issue 1-2, 2013 (USA)
	Kale S. A., Sapali S.N., “Wind Flow Considerations to Predict Power Performance of Counter Rotating Horizontal Axis Wind Turbine and Unidirectional Co-Axial Series Rotor Wind Turbine”, Advances and Applications in Fluid Mechanics, Volume 17, Issue 2, Pages 135 – 146, April 2015, DOI: 10.17654/AAFMApr2015_135_146
	S A Kale, and S N Sapali, “Wind flow considerations to predict power performance of counter rotating horizontal axis wind turbine and unidirectional co-axial series rotor wind turbine”, Advances and Applications in Fluid Mechanics 17 (2), 135-146, 2015
	S. A. Kale, M. R Birajdar, S. N Sapali, “Numerical Analysis of New Airfoils for Small Wind Turbine Blade”, Journal of Alternate Energy Sources and Technologies Vol 6, No 1, ISSN: 2230 – 7982, pp. 01-06, 2015
	International Conference publications
	"The effect of clearance on the performance of a hermetic compressor", International conference on advances in Mechanical Engineering at IISc. Bangalore, 1996.
	"Biomass gasifier steam injected gas turbine co-generation for sugar industry", International conference on advances in Mechanical Engineering at University of Roorkee, Roorkee, 1997.
	“Exergy analysis of modern cryogenic air separation plant”, 3rd International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics Cape Town, South Africa, 21-24 June 2004.
	Parametric evaluation of primary combustion chamber of WTB of sugar factory”, 3rd International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics Cape Town, South Africa, 21-24 June 2004.
	“Condensation of R-134a In a Multi-channel Aluminum Flat Tube Condenser with Micro-fins” , 3rd International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics Cape Town, South Africa, 21-24 June 2004
	Analysis of Flue Gas loss through Mathematical Modeling and Experimentation on Fire Tube Boilers for Performance Improvement, 4th International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics Cairo, Egypt, 2005.
	“Advancement in Kern’s Method and Comparison of Rating Methods” 4th International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics, Cairo, Egypt. 2005.
	“Rating and Optimization of U-Tube Shell and Tube Heat Exchanger” 4th International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics Cairo, Egypt. 2005.
	“Optimization of Shell & Tube Intercooler in Multi-stage Compression Unit”, 4th International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics Cairo, Egypt, 2005.
	“Performance Analysis Of Air-Cooled Condenser Using Micro-Fin Tubes”, 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Sun City, South Africa, July 1-4, 2007.
	“Dynamic Modeling of Bulk Milk Cooler”, 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Sun City, South Africa, July 1-4, 2007.
	“Experimental Apparatus for Measuring in tube Condensation heat transfer coefficient and pressure drop using smooth and micro-fin tubes for HFC refrigerants” ASME Summer Heat Transfer Conference, Jacksonville, Florida USA, August 10-14, 2008
	“Some investigative study on Development of Valve –plate for Hermetic Compressor Using R-410A Refrigerant Blend” International Conference on Advances in Mechanical Engineering , Surat, Gujrat, December 15-17, 2008.
	Functional and Strength Design of one MW wind turbine blade”, International Conference on Energy and Environment (EnviroEnergy), NIT Kurukshetra, March 19-21, 2009
	Experimental evaluation of performance of evaporator of an automotive a/c system under steady state condition. 1St international conference on Mechanical Engineering, ICOME 2010, VIRTUAL FORUM, Praise worthy Prise, s.r.l
	Paper on “ Simulation of Oxygen Plant for biomass gasification application by Aspen Plus” Presented at International Conference RACE-2012, MIT, Manipal, 4-6 January 2012.
	Paper on “Simulation of biomass gasification with oxygen/air as gasifying agent by Aspen plus” presented at International conference on Power and Energy Engineering (ICPEE-2012), 1-2 September, 2012, Phuket, Thailand. [Excellent Oral Presentation Paper Award]
	Citations Mona Gharaie et al., “Techno-economic optimization of IGCC integrated with utility system for CO2 emissions reduction- Maximum power production in IGCC”, Chemical Engineering Research and Design, IChemE, Elsevier, 2013.
	“ Exergy Analysis of Cryogenic Air Separation Unit Integrated with Biomass Gasifier” Presented at World Congress on Engineering and Computer Science 2013 (WCECS 2013), 23-25 October, 2013, San Francisco, USA.
	Paper on “ Exergy Analysis of Cryogenic Air Separation Unit Integrated with Biomass Gasifier” Published in Lecture Notes of Engineering and computer science, IAENG, USA
	“Energetic and Exergetic Performance analysis of Vapour Compression Refrigeration using Refrigerant 22 and R161”, in an international conference on “Emerging Trends in Technology & its Applications”, at Yadavrao Tasgaonkar College of Engineering and Management, Karjat, during March 7-8, 2014.
	“CFD Analysis of Heat Recovery System for Window Air conditioning”, in an international conference on “Emerging Trends in Technology & its Applications”, at Yadavrao Tasgaonkar College of Engineering and Management, Karjat, during March 7-8, 2014.
	S.A. Kale, S.N. Sapali, “Power output prediction and Primary Evaluation of a Unidirectional Co-axial Series Rotors Wind Turbine”, IEEE Xplore Digital Library, Print ISBN: 978-1-4673-5150-8, DOI 10.1109/AICERA-ICMiCR.2013.6576030, INSPEC Accession Number: 13698267 , pp. 1 - 3, 2013
	Kale S. A., Sapali S.N., “Private engineering education scenario in India”, ASME International Mechanical Engineering Congress and Exposition 2014, November 14-20, 2014, Montreal, Canada, ISBN: 978-0-7918-4950-7, DOI: 10.1115/IMECE2014-39952
	Kale S. A., Sapali S.N., “Development and Field Testing of an Inclined Flanged Compact Diffuser for a Micro Wind Turbine”, ASME International Mechanical Engineering Congress and Exposition 2014, November 14-20, 2014, Montreal, Canada, ISBN: ISBN: 978-0-7918-4952-1, DOI: 10.1115/IMECE2014-37883
	S.N. Sapali, S.M. Pise, A.T. Pise,D.V. Ghewade, " Investigation of waste heat recovery from bulk milk cooler", Case Studies In Thermal Engineering 4 (2014)136-143
	S.N. Sapali, S.M. Pise, A.T. Pise,D.V. Ghewade, " Investigation of Energy Savings on Bulk Milk Cooler by Waste Heat Recovery ", Case Studies In Thermal Engineering 4 (2014)136-143
	At National level journal
	"Utilization of distillery spent wash as a supplementary fuel for thermal power plant", Journal of Environment and Pollution, Techno-science publications, Jaypur, 1997.
	Biomass gasifier steam injected gas turbine co-generation plant in place of condensate extraction steam turbine”, Journal of Environment and Pollution, Techno-science publications, Jaypur, March 2004.
	“ Constituents of atmosphere: a review”, Journal of Environment and Pollution, Techno-science publications, Jaypur, September 2004.
	Scope of Biogas in Rural Area, Gramin Bharat EK Chintan, Sahana Publication, Parbhani, Pp300308, December 2012
	Kale S. A., Sapali S.N., “Finite Element Analysis of Vertical and Inclined Flanged Diffusers for Micro Wind Turbine”, Journal of Alternate Energy Sources & Technologies, Volume 5, Issue 2, Pages 37-42, 2014
	Kale S. A., Sapali S.N., “Numerical Analysis of New Airfoils for Small Wind Turbine Blade”, Journal of Alternate Energy Sources & Technologies, Volume 6, Issue 1, Pages 1-6, 2015
	At National level conferences/symposium
	"Evaluation of the performance of a hermetic compressor, existing for high temperature applications, which is used for low temperature applications", IX ISME conference, University of Roorkee, Roorkee, 1994.
	"Computer modeling of a rock-bed and thermic oil energy storage system for solar power plant", National seminar on "Energy for better tomorrow renewable and non-renewable energy sources," (EFBET - 97) at KITS, Ramtek, 1997.
	"Study of improved Claude system, the cryogenic approach for metallic joints and topography of machined parts", XIII National symposium on cryogenic at Shivaji University, Kolhapur, 1993.
	"Parametric evaluation and exergy analyses of cryogenic air separation plants, Presented at the workshop on "Scope for application of cryogenics in rapidly changing industrial scenario of Haldia", at Haldia Institute of Technology, Haldia (WB), 2000.
	"Cryogenic air separation plants: parametric evaluation and exergy analyses, presented at 23rd National seminar on industrial gases, Goa, 2001.
	"Analyses of a rock-bed-thermic oil solar energy storage system”, recent advances in renewable energy technology-2002, at Shivaji University, August 13-14, 2002.
	“Wind power a promising renewable energy source for Maharashtra-A review”, recent advances in renewable energy technology-2002, at Shivaji University, August 13-14, 2002.
	"Intricacies of Argon separation in a cryogenic air separation”, presented at 25th National seminar on industrial gases, Pune, 2003. This paper received a best technical paper award.
	“Retrofitting of Air Conditioning Units With R407c”, National seminar on “Recent advances in Mechanical Engineering”, KKWCOE Nashik, January 16-17, 2004.
	“Effect of Micro-Finned Tubes and Louvered Fins on Heat Transfer Rate of a Condenser and an Evaporator of a Window Air Conditioner”, National seminar on “Recent advances in Mechanical Engineering”, KKWCOE Nashik, January 16-17, 2004.
	“Evaluation of Performance of a solar water heating system with indirect heat exchanger ”, National seminar on “Recent advances in Mechanical Engineering”, KKWCOE Nashik, January 16-17, 2004.
	‘Easterfied Jatropha Curcas Oil as a blended fuel in I.C. engines’, National conference on Energy and Fuel Issues of Future, Pune Institute of engineering and Technology, Pune, November 5-6, 2004.
	“Energy Conservation Opportunity in a Cooling Tower of a Power Plant”, National Conference on Development – Cum – Environment Friendly Future Industrial Fuels, at Kumaraguru College of Technology, Coimbatore-641 006, May 19-21, 2005.
	“Evolution of Cryogenic Air Separation Plants”, Invited paper at in the national conference on Sun Rising Technologies, held at Parshwanath College of Engineering, Mumbai, November 18-19, 2005.
	Design considerations of a hermetic compressor with R410a refrigerant, National Conference, at COE, Pandharpur, 2005.
	“Dynamic Modeling of Bulk Milk Cooler”, 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Sun City, South Africa, July 1-4, 2007.
	“Energetic and Exergetic Performance analysis of Vapour Compression Refrigeration using Refrigerant 22 and R161, in an international conference on “Emerging Trends in Technology & its Applications”, at Yadavrao Tasgaonkar College of Engineering and Management, Karjat, during March 7-8, 2014.
Books published:
		Refrigeration and air Conditioning, PHI Learning Pvt Ltd, New Delhi, April 2009.
		“Heat Transfer” Tech-Max, Pune, II edition July 2006.
		"Basic Mechanical Engineering", Nirali Prakashan, Pune, III edition, March 2007. Heat Transfer” Nirali Publications, Pune, August 2014, ISBN: 978-93-5164-131-5 “Thermodynamics” Nirali Publications, Pune, August 2013, ISBN: 978-93-83073-99-3 “Engineering Thermodynamics”, Nirali Publications, Pune, 2013 “Applied Thermodynamics” Nirali Publications, Pune, August 2013, ISBN: 978-93-83071-34-3 “Thermal Science” Nirali Publications, Pune, 2014, ISBN: 978-93-5164-222-0
	Recognization:
	Recognized teacher to guide Ph.D students, Pune University, Pune. Permanent reorganization as a Ph.D guide, Shivaji University, Kolhapur. Seven students have registered for Ph.D in Pune University and one student in Shivaji University, Kolhapur. 26 ME students have completed Dissertation thesis under my supervision, two students are working for thesis
	6. Designed and developed a metallic joint for joining the fractured bones as required by Krishna Medical Science and Research Center, Karad.
	Patents Publicatons Size Reduction of 1.5 TON window air conditioner using enhanced heat transfer rate. Application No. : 152/MUM/2005 Journal No. - 42/2005, Publication Date : 04/11/2005, Solar operated energy efficient evaporative air cooler without pump Application No. : 2474/MUM/2012 Journal No. - 36/2013, Publication Date : 06/09/2013 Innovative wind turbine Application No. : 2475/MUM/2012 Journal No. - 36/2013, Publication Date : 06/09/2013 Simple Unidirectional Series Rotors Wind Turbine Application No. : 409/MUM/2013 Journal No. - 08/2014, Publication Date : 21/02/2014 Mist nozzle and method of matking the same Application no 2035/MUM/2015A dated 26/5/2015 Journal No.- 05/06/205, Publication date 05/06/2015 A portable electricity producing device Application No. Docket No: 11433 dated 26/05/2015
	Seminar/Conferences attended
	International Conference on Energy Systems and Developments (ICESD 2015), Pune, India, 11-13th February, 2015 ASME 2014 International Mechanical Engineering Congress & Exposition IMECE2014 Montreal, Quebec, Canada, November 14-20, 2014. World congress on Engineering at Klark Campus, University of California, SabFrasisco, USA October 23-25, 2013. World congress on Engineering at Imperial College London, UK held during July 6-7. 2011. National Conference on Alternate Energy Sources for Rural Development, held at Moze College of Engineering, Wagholi, Pune, January 31, 2009. Fifth International Conference on “Heat Transfer, Fluid Mechanics and Thermodynamics” Sun City, South Africa, July 1-4, 2007. National Conference on Sun Rising Technologies, held at Parshwanat College of Engineering, November 18-19, 2005. National seminar on “Recent advances in Mechanical Engineering”, KKWCOE Nashik, January 16-17, 2004. 25th National Seminar on industrial gases held at Pune on 24th and 25th January 2003. National Symposium on Recent Advances in Renewable Energy Technologies, Held at Shivaji University Kolhapur on August 13-15, 2002. IX ISME Conference 94, held at University of Roorkee, November 10-11, 1994. Thirteenth National Symposium on Cryogenics TNSC-93, held at Shivaji University Kolhapur, December 3-5, 1993. Sixth Annual Convention of Maharashtra-Gao Section of ISTE, held at Dr. Babasaheb Ambedkar Technological University, Lonere, December 14-15, 2001

Development of course material/monograph

A book on Heat Transfer, the-max publications, pune-2006. A book, Basic Mechanical Engineering, Nirali Publications, Pune, 1997. Course Notes for two day workshop on “Environment Friendly Refrigeration and Cryogenics” COE, Pune during January 13-14, 2006.

 

Memberships and Affiliations: 

Membership   Life member of ISTE Member of "Board of studies" of Automobile Engineering, Shivaji University, Kolhapur, during 1996-1998 Member of "Board of studies" of Mechanical Engineering, Shivaji University, Kolhapur, during 2002-03 Life member of Alumni Association of COEP. Member of ISHRAE Pune Chapter. Member of "Board of studies" of Mechanical Engineering, Shivaji University, Kolhapur, from 2005-06. Fellow member of Institution of Engineers (India) from 2007. Executive committee member of ISHRAE Pune Chapter for the year 2011-12.

Current Projects : 

Completed:
1. Cryogenic Air separation technology, AICTE New Delhi
2. Design Development and Performance Evaluation of hermetic compressor using R410a refrigerant blend for Air Conditioning Application, Pune University, Pune

Noteworthy UG projects Re-sharpening of teeth of a metal cutting band saw Running an IC engine with alcohol To determine the volumetric efficiency of a reciprocating compressor Determination of a correlation for HT coefficient in laminar flow over a fin To study the performance of petrol engine with variable compression Desktop Air-cooler, Ravi Kadam, Limhan, 2007

Noteworthy PG projects Analyses of a rock-bed-thermic oil solar energy storage system, P.B. Patil, 1999. Exergy analysis of Ice-Plant. Mr Salunkhe, 2002. Parametric and Exergy analysis of combustion chamber of a bagasse fired boiler. Ashish Kadam, 2002. Design and Evaluation of Performance of Hermetic Compressor With R410a or R407c as a Refrigerant Which is Used in Air Conditioning Applications, Ambadas Kandekar, 2003. Performance Evaluation of Domestic Indirect Solar Water Heating System, Rashid Ali, 2003. Overall Size Reduction of 1.5 Ton Window Air Conditioner using Enhanced Heat Transfer Rate, Sachin Satdive, 2003. Condensation of R-134a in a multi flow channel aluminum flat tube condenser with micro-fins, Kiran Gaikwad, 2004. Performance improvement of a boiler, at Forbes Marshall, Pune, Kedar Jambhekar, 2005. Design of a heat exchanger to cool lube oil, Kirloskar Pnuemetic Company Ltd., Pune, Mr. Shashikumar Jogi, 2005. Heat transfer analysis of a Plate Heat Exchanger, Mr. Mallikarjun, 2005 Performance Evaluation of an Indirect Type Solar Water Heater, Mrs. Viashali Chandratre, 2005. Thermal and Exergy Analysis of a primary Condenser of a Chemical Plant, Akhil Srivastav, 2006. Simulation of Cryogenic air Separation Plant, Annasaheb banne, 2006. Thermal Analysis of an intercooler of a turbocharged diesel engine, Suraj Shinde, 2007. Analysis of a coil heat exchanger through fluent software, Deshmukh, 2007. Mesta Oil As A Blended Fuel In C.I. Engines, Sorte, 2007. Study of Boiler Tube Leakages and CFD Analysis of Economizer Tube, Shivdas Prasad, National Thermal Power Station, Eklehre, Nashik, 2008 Parametric Analysis of Cryogenic Air Separation Plant Using Aspen Software, Subhashish Dey, MED,COEP, 2008. Heat Recovery System for Window Air Conditioner, Uttekar R S, MED,COEP, 2009. Optimisation of Exhaust System for three Cylinder Engine, Mutkule G P, ARAI, Pune, 2009. Design and development of Fan test rig and to carry out the performance of a large capacity blower fan, Amol Brahmapurkar, 2009-10. Heat Load estimation, duct design and CFD simulation of a HVAC system for a computer laboratory, by Sujata Dhanali, 2010-11 CFD analysis of Banana cold storage by Kharde Ravindra N, 2010-11 Simulation and experimental analysis in the induction gas dynamics of 2 cylinder naturally aspirated diesel engine, by Yarsam Pravin V 2010-11. Heat Transfer analysis and insulation design for cryogenic liquid nitrogen tank by Upalkar Shripad Arun 2011-12.

Cooling load estimation and energy analysis of building envelop-the software development by Rajan R Gosavi, 2011-12. Heat Recovery system for drying the kitchen food waste by force convection by Moiz Tinwala 2012-13. Design and Optimization of high pressure fuel injection pipes for diesel engines by by Chinmay J Damale, 2013-14. Experimental evaluation and performance of labyrinth seals in reciprocating engines by Anurag N Kumbhare, 2013-14. Heat recovery system for window air conditioning and design improvement using CFD by Kalukhe Sagar Kashinath, 2013-14. Numerical and experimental analysis of industrial water filter, Experimentation, by Navneet Kumar Jha, 2014-15. Optimization of insulation thickness of thermal storage vessel by Mr Navin N Nankani, 2014-15.

On going Ph D thesis

Chaudhari C. S., “Design, Development and Performance Evaluation of a Refrigeration System for a new environment friendly refrigerant” N.D.Shikalgar “ Exergy analysis and Performance Analysis of a refrigerator using ecofriendly refrigerant” Deshmukh A M, “Low cost eco-friendly mist spray direct evaporative cooler”