Primary tabs
rmw.mech@coep.ac.in
Faculty
- 4th International Conference on Emerging Technologies: Micro to Nano (ETMN-2019)(SPPU), Pune & Manipal University, Jaipur
- Conference: Techno-Societal 2016, International Conference on Advanced Technologies for Societal Applications
- Materials Today: Proceedings
- 2ndInternational Conference & Exposition on Advances in Mechanical Engineering (ICAME-2022) June 23-25, 2022, College of Engineering Pune [COEP], Pune, Maharashtra, INDIA
- 1st international conference in fluid thermal and energy systems, June 9-11, 2022, NIT Calicut, Kerla
- Proceedings of the 2ndInternational Conference & Exposition on Advances in Mechanical Engineering (ICAME-2022) June 23-25, 2022, College of Engineering Pune [COEP], Pune, Maharashtra, INDIA
- Acted as NBA coordinator at Govt. college Engineering Karad
- Acted as HOD Mech Deptt for 10 Yers
- Organized TEQIP Sponsored One Week STTP on "Recent trends in non-conventional energy with the focus on solar and wind energy” during 25th-29th May, 2015 at Govt. college Engineering Karad.
- Recognized Ph. D. guide in BAMU, Aurangabad
- Ph.D guidance to 10 Ph. D. scholars
- Acted as a member of Board of Studies as NM University, Jalgaon
- BOS member in BAMU Aurangabad / NMU Jalgaon
- To ignite the young students’ mind for scientific thinking and lifelong learning so as to make them fit to face career and social challenges successfully,
- To inculcate in student, the sense of responsibility towards the environment and society through learning and designing green-technology systems.
- To encourage and guide the students to undertake industry and society need based research projects for their undergraduate study.
- To motivate and guide students and faculty for doctorate degree.
Ravi Mahadeorao Warkhedkar
Designation:
Department:
Email:
Date of Joining COEP:
Qualifications:
|
Educational Qualification: |
|||
|
Qualification |
Name of the Institute |
University |
Year of Passing |
|
Ph.D. [Mechanical Engineering] |
Motilal Nehru National Institute of Technology, Allahabad |
Motilal Nehru National Institute of Technology, Allahabad |
2008 |
|
M.E. (Mechanical) (Power-Engg.)) |
Govt. College of Engineering, Amravati |
Amravati Universityr |
1996 |
|
B.E. (Mechanical Engineering) |
Govt. College of Engineering, Amravati |
Nagpur University, Nagpur |
1985 |
Teaching Responsibility:
|
Working Experience (Starting with current to old) |
|||||
|
Experience Type |
Institute / Company Name |
Graduate/ Post Graduate Level |
Designation |
From |
To |
|
Teaching |
College of Engineering,Pune |
UG& PG |
Associate Professor |
1.10.2020 |
Till date |
|
Teaching |
Govt. College of Engineering and Research, Awasari |
UG |
Associate Professor |
1-4-2016 |
1.10.2020 |
|
Teaching |
Govt. College of Engineering, Karad |
UG& PG |
Associate Professor |
5-8-2011 |
31-3-2016 |
|
Teaching |
Govt. College of Engg. Aurangabad |
UG& PG |
Ass0ciate Professor |
8-7-2008 |
4-8-2011 |
|
Teaching |
Govt. College of Engg. Jalgaone |
UG |
Lecturer in Mech. Engg. (Sr. grade) |
1-10-2004 |
7-7-2008 |
|
Teaching |
Govt. College of Engg. Jalgaone |
UG |
Asst. professor in Mech.(Ad-hoc) |
05-01-1998 |
30-9-2004 |
|
Teaching |
Govt. College of Engg. Jalgaone |
UG |
Lecturer in Mech. Engg. (Sr. grade) |
17-9-1997 |
4-1-1998 |
|
Teaching |
Govt. College of Engg. Amrawati |
UG |
Lecturer in Mech. Engg. |
12-8-1989 |
16-9-1997 |
|
Teaching |
DYP College of Engg. Pimpri Pune |
UG |
Lecturer in Mech. Engg. |
25-1-1988 |
10-8-1989 |
|
Teaching |
B.N. College of Engg. Pusad |
UG |
Lecturer in Mech. Engg. |
22-7-1985 |
11-7-1986 |
Publications:
Research Publications: Total :67 Citations 393
International Journals 21
National Journal 1
International Conferences 38
National Conferences: 7
Petents filled:
|
S No |
Applicant |
Title of the investigation |
Status |
|
1 |
Subim Nabilal Khan Dr. Ravi M Warkhedkar |
An apparatus and method for strength evaluation of bone |
Applied (March 2015) |
|
2 |
Dr. Ravi M Warkhedkar + 3 |
Flow divider type inserts for heat transfer enhancement |
Applied (March 2015) Octo 2014 |
Ph D Students Guided: 8 Ongoing 2
|
Research Publications: INTERNATIONAL JOURNALS:- |
||
|
Title of Paper |
Name of Conference/ Journals in which/where published |
Year of Publication |
|
Reverse Engineering of Human body: A B-spline based Heterogeneous modeling approach, R. M. Warkhedkar, A. D. Bhatt, |
Computer aided Design and applications,Vol5,nos1to4 ISSN 1686-4360 DOI: 10.3722/cadaps.2008.194-208 (Taylor & Francis) |
2008 |
|
‘Material – solid modeling of Human body: A B-spline based Heterogeneous modeling approach, R. M. Warkhedkar, A. D. Bhatt’, |
Journal of computer aided design, 41(2009)586-597 doi:10.1016/j.cad.2008.10.016 (Elsevier), |
2008 |
|
‘A B-spline based Heterogeneous Modeling and Analysis of Proximal Femer with Graded Elements, Uday Pise, , A. D. Bhatt, R. M. Warkhedkar’ |
Journal of Biomechanics 2009.05.019 Doi:10.1016/j.jbiomech.2009.05.019 (Elsevier) |
2009 |
|
‘A B-Spline Interpolation Based Method for Reconstruction of Image from Partial Data , A.D. Bhatt, U Gupta, V Wagholikar, R.M. Warkhedkar, A Thandra’ |
Computer-Aided Design & Applications, 8(a), 2011, bbb-ccc © 2011 CAD Solutions, LLC DOI: 10.3722/cadaps.2012.531-547 (Taylor & Francis) |
2012 |
|
‘Thermal performance of elliptical pin fin heat sink under combined natural and forced convection, P. A. Deshmukh, R. M. Warkhedkar’ |
Experimental Thermal and Fluid Science Volume 50, October 2013, Pages 61–68 doi:10.1016/j.expthermflusci.2013.05.005 (Elsevier) |
2013 |
|
‘Analysis and Evaluation of Limb Alignment in Total Knee Replacement; Nilesh Ghongade , Ravi Warkhedkar & Ashok Shyam’ |
Computer-Aided Design and Applications, 11:1, 69-77, DOI: 10.1080/16864360.2013.834141 DOI: 10.1080/16864360.2013.834141(Taylor & Francis) |
2013 |
|
‘Analysis of bone mineral density of human bones for strength evaluation.S N Khan , R M Warkhedkar, A K Shyam ’ |
Sadhanapp 1-13 First online: 11 September 2015 (Springer) |
2015 |
|
‘Rapid prototyping and thermal gradient method applied to fabrication porous structure for application in biomedical field ’ |
CAD’15, London, UK, June 22-25, 2015, 492-497 © 2015 CAD Solutions, LLC, (Taylor & Francis) |
2015 |
|
‘Studies on heat transfer in flow of silver nanofluid through a straight tube with twisted tape insertsD. R. Waghole, R. M. Warkhedkar et al ’ |
Heat and Mass Transfer Springer ISSN 0947-7411 (print) 1432-1181(online)DOI 10.1007/s00231-015-1563-x (Springer) |
2015 |
|
‘Productivity enhancement by reducing adjustment time and setup change ,R Palanivasan, R. M. Warkhedkar ’ |
Int Journal of Mechanical & Industrial Engineering, 2011 ISSN No 2231-6477, p 37-42 |
2011 |
|
‘Thermal performance of pin fin heat sinks: A review of literature, P. A. Deshmukh, R. M. Warkhedkar’ |
International Review of Mechanical Engineering (I.RE.M.E.) Vol, xx,n,x |
2011 |
|
‘Modeling and Analysis of Rectangular Fin Heat Sinks under Natural Convection for Electronic Cooling’ |
International Journal of Engineering Research and Technology, ISSN 0974-3154 Volume 4, Number 1(2011), pp. 67-74 |
2011 |
|
‘Heat Transfer Analysis of Absorber, D.R. Waghole Dr. R. M. Warkhedkar Dr. M. V. Kulkarni’ |
International Journal, IJAER 2011, ,Vol I Nov issue, Nov 2011,ISSN number 2231-5152. |
2011 |
|
‘Correlation between BMD and Radio intensity of Human Bones for Strength Evaluation S. N. Khan , R. M. Warkhedkar , A. Shyam , B. R. Patil’ |
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN(e) : 2278-1684, ISSN(p) : 2320–334X, PP : 40-44 |
2011 |
|
‘Heat Transfer Enhancement by using Nanofluids in Heat Pipe-A Review Kusure Balasao Dr. R. M. Warkhedkar, P. R. Harde, P. K. Shirke’ |
Applied Mechanics and Materials Vols. 592-594 (2014) pp 932-938 © (2014) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.592-594.932 |
2014 |
|
‘Performance enhancement of thermal energy storage system with paraffin wax as phase change material: a review Prashant Shirke, Ravi Warkhedkar, A.T.Pise and B.D.Kusure’ |
Elixir Mech. Engg. 72 (2014) 25419-25422 Available online at www.elixirpublishers.com (Elixir International Journal) |
2014 |
|
Knowledge management implementation in Indian automobile ancillary industries: An interpretive structural model for productivity Nitin Yashwant Patil ,Ravi M. Warkhedkar |
Journal of Modelling in Management ISSN: 1746-5664(2016) Vol. 11 Iss: 3, pp.802 - 810 DOI http://dx.doi.org/10.1108/JM2-04-2015-0018 |
2015 |
|
New Revolutionary Ideas of Material Processing – A Path to Biomaterial Fabrication by Rapid Prototyping Sarange Shreepad, Warkhedkar Ravi |
Procedia - Social and Behavioral Sciences 195 ( 2015 ) 2761 – 2768 doi: 10.1016/j.sbspro.2015.06.390 |
2015 |
|
Test Standards for Direct Steam Generating Solar Concentrators, Mahesh Rathod, Ravi Warkhedkar |
Journal of Power and Energy Engineering, 2015, 3, 1-10 Published Online December 2015 in SciRes. http://www.scirp.org/journal/jpee http://dx.doi.org/10.4236/jpee.2015.312001 |
2015 |
|
Fuzzy Logic Application for of fabrication Hydroxyapatite for Biomedical Applications, Sarange Shreepad, Ravi M.Warkhedkar |
BIT’s 2nd Annual Congress of 3D printing 2015, nov. 13-15, 2015 Oingdao China |
2015 |
|
NATIONAL JOURNALS |
||
|
Title of Paper |
Name of Conference/ Journals in which/where published |
Year of Publication |
|
Optimizing Influence of process parameters on induction hardening for Engine IC valve, R Palanivasan, RM Warkhedkar’ |
Indian Journal of Science and Technology, Vol 3 No 7 (July 2010) ISSN 0974-6846 page 721-723 |
2010 |
|
INTERNATIONAL CONFERENCE:- |
||
|
Title of Paper |
Name of Conference/ Journals in which/where published |
Year of Publication |
|
‘Computer aided Tissue engineering a review’ |
International CAD conferences CAD-06, Phuket Malaysia June 19-23, 2006, |
2006 |
|
‘Development of CAD in four decades the state of the art’, |
ICDM-08, Karunya university Coimbatore 1-2 Feb 2008 |
2008 |
|
‘Optimization of spot welding using Taguchi Method’ |
International Conference on Energy Optimization and Control (ICEOC-2010) Dec 28-30, 2010 GECA, Aurangabad |
2010 |
|
‘From CT scan to analytical human anatomy’ |
Proceedings of International Conference on the Applications of Computerized Tomography “CT 2008”, pp-1-4, Kanpur, India, February 15-17, 2008. |
2008 |
|
‘Techno-economicanalysis of integrated solar power PV wind energy hybrid systems with battery storage’ |
International Conference on Energy Optimization and Control (ICEOC-2010) Dec 28-30, 2010 GECA, Aurangabad |
2010 |
|
‘Optimizing Influence of process parameters on induction hardening for Engine IC valver residual stresses’ |
International Conference on Recent Advances In Mechanical Engineering, Noorul Islam University ,Kanyakumari 8,9 April 2010 |
2010 |
|
‘Bio-CAD modeling: scope and applications’ K. V. Nemade, Dr. V. K. Tripathi, Dr. R. M. Warkhedkar |
1st IFIP International Conference on Bioinformatics at SardarVallabhbhai National Institute of Technolgy, 0 |
2010 |
|
‘Heat Transfer analysis of receiver/absorber Tube of Parabolic Trough collector’ |
Proceedings of the 37th National & 4th International Conference on Fluid Mechanics and Fluid Power December 16-18, 2010, IIT Madras, Chennai, India. |
2010 |
|
‘Comparison of thermal performance of circular and elliptical pin fin heat sinks in assisting mixed convecton, Deshmukh P. A, Warkhedkar R. M.’ |
Energy Efficient Technologies for Sustainability (ICEETS), 2013 International Conference on date 10-12 April 2013, IEEE Xplore digital library |
2013 |
|
‘Heat transfer enhancement in a tube using Elliptical-cut twisted tape insert and Al2O3/Water nanofluid: Review Pratik P. Ganorkar and R.M. Warkhedkar ’ |
3rd International Conference On “Advance Trends in Engineering, Technology and Research”(ICATETR-2014) 22-24th, Dec 2014, Kotta |
2014 |
|
‘Optimization of turning parameters for surface roughness and tool wear based on the gray national analysis ,S. S. Kadam, R. M. Warkhedkar’ |
ICMEAIC, June 14, Corporate group of Institutes, Bhopal, India,IISN 2319-6890, 2347-5013 |
2014 |
|
‘Experimental Investigations on performance of silver nanofluid in Absorber/Receiver of Parabolic collector, Waghole D. R, R. M. Warkhedkar, V. S. Kulkarni ’ |
International conference, MNF 2014, Sept 2014 |
2014 |
|
Materials selection for hybrid and electric vehicle battery pack thermal management: A review, R. M. Warkhedkar, Shankar Durgam, Priyanka Datir et al |
2021 |
|
|
Fabrication and Characterization porous structure using HA and Ti by Rapid prototyping for Biomedical Application; Ravi Warkhedkar , Shreepad Sarange , Pramod Wadate |
|
2019 |
|
Novel Method for Fabrication and Characterization Porous Structure Using Rapid Prototyping and Thermal Gradient Method; R. M. Warkhedkar Shreepad Sarange |
|
2016 |
|
A Self balancing tray for elederly people Ravi Kumar Gupta, Nupur Gupta, Ravi Warhedkar |
|
2022 |
|
Heat Transfer and Pressure Drop Performance Improvement using Circular Spines for Flow through Circular Pipe ; Prakash Batule, Prashant W. Deshmukh, and R.M.Warkhedkar1 |
|
2022 |
|
An Experimental Study of Venturi Aeration System Aniket Dange, Ravi Warkhedkar, Niyaj Shikalgar |
|
2022 |
|
National Conferences: |
||
|
Computer stimulated analysis of solar hot water |
EFBET 97, KITS Ramtek Nagpur June 1997 |
1997 |
|
Solar drying for agricultural products |
--do--- |
1997 |
|
Human bone a bio-modeling object |
NCBME 2006 Sardarpatel institute of technology 28th&29th March 2006 |
2006 |
|
Quality Function Deployment, Patro B. P, Warkhedkar Ravi M, Sonawane S. A.. |
Proceedings of National Conference on Advances in Mechanical Engineering (AME09), Don Bosco Institute of Technology, Banglore |
2009 |
|
Optimization of influence of Process Parameters on CNC Turning for 21-4N Material |
National Conference on Product Engineering N CPE 2010, Dec 3-4,2010,SGGS, Nanded |
2010 |
|
Medical image processing for human bone modeling- V. Nemade,Dr. V. K. Tripathi, Dr. R. M. Warkhedkar. |
National Conference on Recent Trends in Information Technology, February 26-27, 2010, Department of Computer Science &Information Technology |
2010 |
|
Experimental investigations of cutting parameters influence on tool wear in turning of Metal matrix composite, S. S. Kadam, R. M. Warkhedkar |
4th National Conference on “ Recent Advances in Manufacturing (RAM-2014)”, 26-28 June,2014 pp 60-65 |
2014 |
|
Experimental investigations of cutting parameters influence on surface roughness in turning of Metal matrix composite, S. S. Kadam, R. M. Warkhedkar |
4th National Conference on “ Recent Advances in Manufacturing (RAM-2014)”, 26-28 June,2014 pp 7-12 |
2014 |
|
Flow boiling heat transfer characteristics of water based nanofluid inside a threaded tube with different tube inclinations, A. T. Pise, F. S. Tanekhan, R. M. Warkhedkar |
e: Proceedings of the 23rd National Heat and Mass Transfer Conference and 1 st international ISHMT-ASTFE Heat and Mass Transfer ConferenceAt: Thiruvananthapuram, IndiaVolume: IHMTC2015 17-20 December, 2015, |
2015 |
|
Workshops/ Seminars/ Trainings : |
||
|
|
Name of College |
Duration and Dates |
|
Enterprenurship Trainees training programme |
college of engineering Shegaon |
21st July 1992 to 30th July 1992 |
|
C Programming |
Govt. polytechnic Amrawati |
21st April 1997 to 3rd May 1997 |
|
RDBMS programming using FOXPRO |
Govt. polytechnic Amrawati |
26th May 1997 to 7th June 1997 |
|
C++ & introduction to Java |
Bengal engineering college, Howrah |
27th Dec 1999 to 07th Jan 2000 |
|
Recent trends in computer visual Aids for effective teaching |
GBSD college of engineering Dhule |
22nd Oct 2001 to 09th Nov 2001 |
|
Smart materials ; opportunity & challenges |
Motilal Nehru Institute of Technology, Allahabad (UP) |
29th NOV 2004to 10th Dec 2004 |
|
CAD & FEM |
Motilal Nehru National Institute of Technology, Allahabad. |
21st July 2008 to 2nd August 2008 |
|
Best Practices in Curriculum Development of Mechanical Engineering (TEQIP) |
Walchand College of Engineering, Sangli |
27th June 2014 |
Other:
Achievements:
Awarded as best project guide at DIPEX-2000 Nasik
|
Career Objectives: To contribute towards Nation’s development through: |
|
|