Primary tabs

vkt.mech@coep.ac.in

Faculty

Dr. Vipin Kumar Tripathi

Designation: 

Associate Professor

Department: 

Mechanical

Email: 

vkt.mech@coep.ac.in

Phone Number: 

020-25507241

Website: 

www.coep.org.in

User ID: 

vkt.mech@coep.ac.in

Teaching Experience: 

18

Industry Experience: 

1

Research Experience: 

4

Qualifications: 

Ph.D. (Mechanical Engg.)
Specialization: Optimization, CAD, Composites

Teaching Responsibility: 

Optimization, CAD, Composite materials

Additional Responsibility: 

Prof in Charge, CAD/CAM/CAE Centre

Publications: 

International Journals

  • Variable thickness approach for finding minimum laminate thickness and investigating effect of different design variables on its performance, N. S. Kulkarni, V. K. Tripathi, Archive of Mechanical Engineering (In press)

  • Dependence of repair strength on the size of FRP patch bonded to a cracked aluminum alloy panel, P. S. Shinde, P. Kumar, V. K. Tripathi, Thin Walled Structures, 124, 2018, 303 - 311

  • The role of yield stress on cracked thin panels of aluminum alloys repaired with a FRP patch, P. S. Shinde, Prashant Kumar, K.K. Singh, V.K. Tripathi, P.K. Sarkar & Sudindra Aradhi, Journal of Adhesion, Vol. 93(5), 2017, 412-429

  • OptiComp: A comprehensive procedure for optimal design of a composite laminate, V. K. Tripathi, N. S. Kulkarni,  Int. J. of Engg. Sciences, Vol. 8(2), 2014, pp. 110 -120

  • ‘Experimental study of CFRP patches bonded on a cracked aluminum alloy panel’, P. S. Shinde, P. Kumar, K. K. Singh, V. K. Tripathi and P. K. Sarkar, Composite Interfaces, Vol. 22(4), 2015, pp. 233 – 248

  • ‘The contact stress calculations in artificial hip-joint by finite element method’, V.K.Tripathi, K. V. Nemade, Int. J. Computer Aided Engineering and Technology, Vol. 6, No. 4, 2014, pp 430 - 439

  • Topology optimization of an automotive steering knuckle’, Patil D. S., Deokar R. G., V. K. Tripathi, Int. J. of Engg. Sci.,Vol 8(1), pp. 18-24, 2014

  • Optimization of compressive strength of zirconia based dental composites, U. V. Hambire, V. K. Tripathi, Bull. Mater. Sci., Vol. 37(6), 2014, pp. 1315–1320

  • Investigation into Micro Hardness properties of Zirconia in Dental composites, U. V. Hambire, V. K. Tripathi, Int. J. of Engg. Sci., Vol. 3(3), 56-61, 2013

  • ‘A Mathematical model to calculate contact stresses in artificial Human hip joint’, Keshav V. Nemade, V.K. Tripathi, International Journal of Engineering Research and Development, Vol. 6 , Issue 12, 2013, pp. 119-123

  • ‘Mathematical Modeling of the Properties and Wear of the Copper Alumina Metal Matrix Composite Synthesized by PM Route’, Mahendra Sable, V.K. Tripathi, International Journal of Engineering Sciences, 2(1), July, 2013, pp. 32 – 39

  • ‘Experimental evaluation of different fillers in dental composites in terms of mechanical properties’, U. V. Hambire and V. K. Tripathi, ARPN Journal of Engineering and Applied Sciences, Vol. 7(2), 2012, pp. 147 – 151

  • ‘Effect of cryogenic treatment on wear behaviour of M2 tool steel’, S. A. Sonawane, V. K. Tripathi, Int. J. of Engg. Sci., Vol.3(2), 2013, pp. 26-33

  • ‘Comparison of mechanical properties of resin based dental composites with different filler types’, U. V. Hambire and V. K. Tripathi, Journal of Materials & Metallurgical Engineering, 2(1), 2012, pp. 1-8

  • ‘Geometric Assessment of Hip-joint Parameters Using Computer-Aided Modeling’, K. V. Nemade, V. K. Tripathi, Int. J. of Engg. Sci., Vol. 5(1), 2013, 46-52

  • ‘Critical J-Integral of Thin Aluminium Sheets Employing a Modified Single Edge Plate Specimen’ P. S. Shinde, K. K. Singh, V. K. Tripathi, P. K. Sarkar & Prashant Kumar, International Journal of Modern Engineering Research (IJMER), 2(3), 2012, pp- 1360-1365

  • ‘Fracture toughness of thin aluminum sheets using modified single edge notch specimen’, P.S. Shinde, K. K. Singh, V. K. Tripathi, P. K. Sarkar, P. Kumar, Int. J. of Engineering and Innovative Technology, 1(5), pp. 283 – 288, 2012

  • ‘Review paper on analysis of composite patches as a crack arrester’, P. S. Shinde, V. K. Tripathi, Prashant Kumar, P. K. Sarkar and K. K. Singh, Journal of Engineering and Applied sciences, 6(3), pp. 222 – 226, 2011

  • Experimental analysis of effect of casting parameters on metal matrix composite and wear, S. V. Gawali, V. B. Tungikar and V. K. Tripathi, Int. J. of Engineering Research and Industrial Applications, 4(4), pp. 447 – 464, 2011

  • ‘Fabrication and study of optimum properties of copper alumina metal matrix composites for high temperature applications’, Mahendra J. Sable and Vipin K. Tripathi, Int. J. of Ind. Engg. and Tech., 3(2), 2011, pp. 143 - 154

  • ‘Comprehensive analysis of composition of friction brake liner for heavy commercial vehicle – A review’, V. K. Tripathi et. al., Int. J. of Materials Engg. and Tech., Vol. 5, Issue 1, 2011, pp. 41 - 59

  • ‘A critical analysis of NAO (Non Asbestos Organic) materials of composite used for friction liners of trucks’, V. K. Tripathi et. al., Int. J. of Engg. Sc. And Tech., Vol. 3, No. 2, pp. 1422 – 1431, 2011

  • ‘A systematic procedure to find optimum composition of the material used for friction liners of trucks’, V. K. Tripathi et. al., Int. Journal of Engineering Sciences, 1 (1), pp. 39 – 54, 2010

 

National Journals

  • Optimization of compressive strength using Taguchi's Technique for  zirconia based dental composites, U. V. Hambire, V. K. Tripathi, Bulletin of Materials Science, Indian Academy of Sciences, Vol. 37(6), 2014, pp. 1315-1320

  • ‘Reduction in Stress Intensity Factor of a Compact Tension Specimen by Bonding Symmetrical GFRP Patches’, P. S. Shinde, V. K. Tripathi, K. K. Singh, P. K. Sarkar & P. Kumar , Journal of Institution of Engineers , India, Series – C, Springer verlag, October, 2013, Vol. 94 (3), pp 239-244

  • ‘Modeling of wear behavior of copper alumina metal matrix composites prepared by PM route’, M. J. Sable and V. K. Tripathi, Advances in Computational Sciences and Technology, 5(2), 2012, pp. 379 – 389

 

International conferences

  • ‘Weight minimization of composite laminate for compressive loading using ‘OptiComp’, N. S. Kulkarni, V. K. Tripathi, International conference on production automation and mechanical engineering, Pattaya, Thailand, January, 2016

  • Optimization of compressive strength in Zirconia nanoclusters of the Bis-GMA & TEGDMA based dental composites, U. V. Hambire, V. K. Tripathi, Procedia Engineering, Elsevier, 51, 2013, pp. 494 – 500

  • ‘Optimum Design of Systems using Principles of Optimization‘, V. K. Tripathi, M. J. Sable, S. S. Sonawane, K.V. Nemade, U. V. Hambire, In handbook of 7th Asian Conference on Fixed Point Theory and Optimization, University of Kasetsart, Thailand, 2013

  • ‘Optimization of Composite Laminate Plate : A Review’, Nishant Kulkarni, V.K. Tripathi, International Conference on Advances in Engineering and Technology, SKNSITS, Lonavala, India, 15 – 17 May 2013.

  • ‘Redesigning of a Trailing Arm Suspension Using Topology Optimization’, Vaibhav Pawar, Bhushan Kulkarni, V.K. Tripathi, International Conference on Advances in Engineering and Technology, SKNSITS, Lonavala, India, 15 – 17 May 2013.

  • ‘Validation of Experimental –cum-Numerical Technique for Critical J Integral of Thin Sheet through Bugley and Landes Approach’, P. S. Shinde, K. K. Singh, V. K. Tripathi, P. K. Sarkar and P. Kumar, Proceeding of International Conference on Advances in Mechanical Engineering, May 29-31, 2013, S6/07, COEP, Pune , India.

  • ‘Optimum Design of Multi-speed Gear Box using Genetic Algorithm’, V. K. Tripathi, Mayur Giri and Pravin Abhang, In Proceedings of International Conference on Mechanical, Manufacturing and Industrial Engg., Amsterdam, The Netherlands, July, 2011

  • ‘Repair of a cracked specimen of acrylic sheet through bonding GFRP patches’, P. S. Shinde, K. K. Singh, V. K. Tripathi, P. K. Sarkar and P. Kumar, ISAMPE Nat. Conf. on Composites, INCCOM10, P2, Army R&D Establishment, Pune, 2011

  • ‘Bio-CAD modeling: scope and applications’, K.V. Nemade, V. K. Tripathi, R. M. Warkhedkar, 1st IFIP International Conference on Bioinformatics at Sardar Vallabhbhai National Institute of Technolgy, Surat, March 25 – 28, 2010

  • ‘A patch-by-patch shape matching procedure for rigid body docking’, Vipin K. Tripathi, The World Congress on Engineering 2007 at Imperial College London, 2 to 4 July, 2007, London, U.K.

  • ‘A simple surface representation technique for rigid body docking’, V. K. Tripathi, B. Dasgupta, K. Deb and H. K. Voruganti, Nanotech 2006, May 7 to 11, 2006, Boston, U.S.A.

  • 'Optimizing traveling salesman problem using evolutionary algorithms', Nemade Keshav, V. K. Tripathi, In Proc. of Int. Conf. on Advances in Manufacturing and Technology Management, P.C.E. Thane, India, 2007

  • ‘An approach for surface generation from measured data points using B-splines’, V. K. Tripathi, Bhaskar Dasgupta and Kalyanmoy Deb, In proc. of the International Conference on Systemics, Cybernetics and Informatics, Hyderabad, India, Jan. 2005

  • ‘Set up time reduction by SMED principles – A case study’ , J. M. Jagtap, V. K Tripathi, In proc. of the International Conference on Logistics and Supply Chain Management held at the PSG College of Technology, Coimbatore in association with Central Michigan State University, USA, 2001

 

National Conferences

  • ‘Biomass gasification – producer gas as a sustainable source of fuel for I. C. Engines’, K. V. Nemade, V. K. Tripathi, Natl. Conf. on Integration of Energy from Conventional and Non-Conventional Sources, LNCT Bhopal, India, Oct. 7 – 9, 2006.

  • ‘Control of downstream river pollution – A tribology approach’, V.K. Tripathi, In proc. of ENVIRO 2001 at PSG college of Tech., Coimbatore, India, 2001

  • ‘Cellular manufacturing system – A case study’, V.K Tripathi, W.C.M.S. 2000, B.I.E.T. Jhansi, India, 2000

  • ‘Optimization of melt quality in aluminium foundry practice’, G.P. Chaudhari, V.K.Tripathi, National Conference at PSG college of Technology, Coimbatore, India, 1999

 

Monograms (Book Chapters)

  • ‘Multi-objective Optimization of Planetary Gear Train’, Vipin K. Tripathi and Hiten M. Chauhan, Lecture Notes in Computer Science, Springer Verlag, Germany, Book No. 6457, pp. 578 – 582, 2010

‘A computational method for viewing molecular interactions in docking’, Vipin K. Tripathi, Bhaskar Dasgupta and Kalyanmoy Deb, Pixellization Paradigm, Book No. 4370, Lecture Notes in Computer Science, Springer Verlag, Germany, 2006, pp. 151 – 162

 

Memberships and Affiliations: 

  • Life Member of Indian Society for Technical Education (LM 16825)

  • Member of The Institution of Engineers (India) (M – 134482-4)

  • Member of Executive Council of Asian Society for Research in Engineering Sciences (ASRES) (MAI 0001)

 

Current Projects : 

  Aeronautics Research & Development Board, Govt. of India
• Optimum design of composite patches to arrest a crack in thin plates

© 2019 COEP. All Rights Reserved. Site Developed By COEP Webteam.

© 2016 College of Engineering Pune. All rights reserved