Primary tabs

rtu.elec@coep.ac.in

rtu.elec@coep.ac.in's picture

Faculty

Dr. Rajaram Tukaram Ugale
 

Designation: 

Assistant Professor

Department: 

Electrical

Email: 

rtu.elec@coep.ac.in

Mobile Number: 

9850023908

Phone Number: 

020-25507413

Website: 

http://www.coep.org.in/mycoep/rtueleccoepacin

Prior to joining COEP Industrial Experience (Years): 

3

Prior to joining COEP Teaching/Research Experience: 

0

Teaching Experience: 

20

Industry Experience: 

3

Research Experience: 

5

Qualifications: 

  • Ph. D. in Elecctrical Engineering (Govt. College of Engg. Pune, [COEP], Pune University)

          Research Area: Permanent Magnet Machines
          Ph. D. Research Topic - Performance Enhancement of Line Start Permanent Magnet Synchronous Motors

  • M. E. Electrical Engg. (Power Systems) - Rank 2 in Pune University (Govt. College of Engg. Pune [COEP])
  • B. E. Electrical Engg. (Govt. College of Engg. Pune [COEP], Pune University)
  • D.E.T.E.- Diploma in Electronics & Telecommunication Engg (E&TC). (Govt. Polytechnic, Pune [GPP], MSBTE, Mumbai)

Teaching Responsibility: 

UG LEVEL:

1. Electrical Machines -I / Transformer and DC machines
2. Electrical Machines - II / AC Machines
3. Electrical Apparatus and System Design Lab
4. Industrial Electrical Systems
5. Industrial Drives
6. High Voltage Engineering
7. Basic Electrical Engineering
8. Electrical and Electronics Measurement

PG LEVEL:

1. Analysis of Electrical Machines

2. Mathematical Modeling and Analysis of Electrical Machines

3. Industrial Motion Control

4. Advanced Electric Drives

5. Fundamentals of Electrical Machines and Drives

UG & PG PROJECTS:

Guided: UG Projects: 29 completed 02 ongoing

Guided: PG Dissertations : 39 PG Dissertations completed 05 ongoing; 

 

Awards and Honors Received:

[1].  The paper selected as "Best Paper" and received first prize in the conference.

R. T. Ugale and B. N.Chaudhari, "Behavior of line start permanent magnet synchronous motor under unbalanced supply", Energy conversion - PCID-2008, Fourth National Conference on Cutting edge technology on Power Conversion and Industrial Drives held at Bannari Amman Institute of Technology, Sathyamangalam, (Erode); Tamilnadu during Feb. 22-23, 2008.

[2]. The paper selected as "Best Paper" and received first prize in the conference.

 Nagabhushan Rao and R. T. Ugale; Effect of short power Interruptions on the performance of line start permanent magnet synchronous Motor", National Level Technical Symposium, PRAGNYA'08, held at JNTU COE, Hyderabad, India, during March 3-4, 2008. 

[3]. In Academic year 2014-15, received "Cognizant Best Faculty Award: 2014-15".

[4]. In Academic Year 2012-13, received “Best Teacher Nominee Award” among College of Engineering Pune (COEP) faculty.

[5]. During academic 2018-19 received Mr Raj S. Iyer Award  of Rs.25000/- from Alumni Association of College of Engineering Pune for Best working model project of Electrical Engineering Department titled, "Design and Development of Ultra compact power electronic drive for BLDC Motor for Agricultural application", to B. Tech. Project batch students Ashish Pisal (MIS 111505079), Bhushan Mahamuni (MIS 111505077), Sanath Poddar (MIS 111505049)and Shubham Pawar (MIS (MIS 141605009) and Guide- Dr. R. T. Ugale. 

[6]. During academic year 2018-19 received Mr. Ananad Kanhere Prize for the Innovative Project titled, "Autonomous electrical three-wheeler development to drive on a pre-defined path-Development of robust autonomous steering and braking system" to M. Tech. Electrical Engineering (PEMD) dissertation student Mr. Sachin Jijabrao Patil (MIS no.121749015) and Guide- Dr. R. T. Ugale

[7]. Received a Rank 2 Certificate in M. E. Electrical Engineering (Power Systems) Exams in Pune University held in December 2001..

[8]. Selected for NTS and NMS Scholarship in 1990.

[9]. Authors received INR 11,000/- Award/Honorarium from the conference committee for research contributions

 K. D. Mejari and R. T. Ugale, "Solid sate Circuit Breaker based fault and load management in 22 kV power distribution system”, 9th International conference on Switchgear and Control gear, SWICON 2015, held at The Hotel Lalit, Mumbai, during 26,27 Nov. 2015. [Organized by IEEMA and Supported by MHRD, TEQIP and IEC]. 

 

Additional Responsibility: 

1. Presently working as M. Tech. Power Electronics and Machine Drives (PG-PEMDCoordinator since Sept. 2016

2. Working as Electrical Machines Laboratory In charge since 2002, (Participated in Upgradation of Lab)

3. Engaged a 20 hours a training session (Theory + Interactions) on "BLDC motor design, control, selection and testing" for John Deere employees at John Deere,  Magarpatta, Pune during in April, May and June (Weds and Frids),  2018. 

4. Worked as a Judge in "Smart India Hackathon, 2018' at College of Engineering, Pune" Theme- Security and Survellance, Hardware Edition Grand Finale held at COEP during 18-22 June 2018.

5. Worked as a Co-convener for 8th National Power Electronics Conference (NPEC) 2017 held at COEP during 18-20 Dec. 2017.
6. Engaged 5 days training to John Deere Inc. Pune employees on "Revision of Eectrical basics and Hard wire relay logic bsed control of  Electromechanical systems" . Training held in two batches in COEP. Batch -1 with 9 employees during 28 Oct. to 23 Dec. 2015 (Only on Saturday and Sundays) and Batch -2 with 8 employees during 30 Apiri to 15 June 2016 (only on Saturday and Sundays).

7. Worked as M. Tech. Power Systems (PS) Coordinator (2013-2016) and faced  PG PS NBA visit during 11-13 March, 2016
8. Worked as PG admission core committee member for years 2008, 2009, 2010
9. Worked as Assistant PG coordinator during 2003-2007

10. Treasurer, Co-operative Society

Working/Worked as a Reviewer for following Journals/Transactions/Conferences:

1. IEEE Transactions on Industrial Electronics, 2. IEEE Transactions on Industry Applications, 3. IEEE Transactions on Energy Conversion, 4.IEEE Transactions on Magnetics, 5. IET Jornal on Electric Power Applications, 6. IET Journal on Generation, Transmission and Distribution, 7. Elsevier- Electric Power and Energ Systems, 8. Taylor and Francis Journal on Electric Power Components and Systems, 9. Europian Transaction on Electrical Engineering,   10. Worked as Reviewer for various IEEE conferences i.e. ICIC 2015, ICEM 2016, PEDES 2016, IECON 2016, CAST 2016, IEMDC 2017, NPEC 2017, ICPS 2017,  ICICET 2018, PEDES 2018, IECON 2020.

 

Publications: 

RESEARCH PUBLICATIONS VISIBILITY/CITATIONAS:

                     Google Scholar https://scholar.google.com/citations?user=RX9Mh6YAAAAJ&hl=en

                    Scopus Publication details: https://www.scopus.com/authid/detail.uri?authorId=24400154700

                    Web of Science/Publons Publications: https://publons.com/researcher/1454086/rajaram-ugale/

JOURNAL/CONFERENCE PAPERS UNDER REVIEW: [ 01 Nos.]

[1] One paper is under review in an International Journal .......


JOURNAL / IEEE, IET TRANSACTION PAPERS PUBLISHED: [8 Nos.]

[1]. R. T. Ugale and B. N. Chaudhari, “Performance enhancement of line start permanent magnet synchronous motor using a special consequent pole rotor,” IEEE Transactions on Energy Conversion, vol. 36, no. 3, pp. 1972-1982, September 2021  DOI: 10.1109/TEC.2020.3038725, Print ISSN 0885-8969, Electronic ISSN 1558-0059, Published online on 17 Nov. 2020.

[2]. Priyanka M. Golatgaonkar, Rajaram T. Ugale, Bhalchandra N. Chaudhari and Bhavesh A. Rathod, "Analysis and comparative evaluation of multi stack and a novel single stack poly phase transverse flux machines," Taylor & Francis Journal, Electric Power Components and Systems, vol.48, Issue.16-17, pp.1835-1847, May 2021DOI doi.org/10.1080/15325008.2021.1890859, Published online on 22 March 2021.

[3]. Priyanka Golatgaonkar, Bhalchandra Chaudhari and Rajaram Ugale, " Torque Ripple Reduction in Homopolar Poly-phase Transverse Flux Machine", IET The Journal of Engineering, vol. 2019, Issue 17, pp.3553-3558, May 2019. DOI:  10.1049/joe.2018.8187, Online ISSN 2051-3305, Available online: 17 May 2019.

[4] R. T. Ugale, K. D. Mejari and B. N. Chaudhari, "Intermediate Voltage Variation based Interconnecting Transformer Design for Voltage and Phase Angle Control with Coupled field FEA Studies", IEEE Transactions on Industrial Electronics,  vol. 65, no.8, pp. 6077-6088, August 2018. DOI 10.1109/TIE.2017.2784404, Print ISSN: 0278-0046, Electronic ISSN: 1557-9948, Published Online on 18 Dec. 2017.

[5]. R. T. Ugale and B. N. Chaudhari, “Rotor configurations for improved starting and synchronous performance of line start permanent magnet synchronous motorIEEE Transactions on Industrial Electronics, vol.64, no.1, pp.138-148, January 2017. DOI: 10.1109/TIE.2016.2606587, Print ISSN 0278-0046, Electronic ISSN: 1557-9948, Published online on 07 Sept. 2016.

[6]. R. T. Ugale, B. N. Chaudhari, S. Baka, S. S. Dambhare and A. Pramanik, "Induced Pole Rotor Structure for Line Start Permanent Magnet Synchronous Motors," IET Journal (Previously known as IEE Proceedings) Electric Power Applications, vol.8, Issue 4,pp.131-140, April 2014. DOI: 10.1049/iet-epa.2013.0223 , Print ISSN 1751-8660, Online ISSN 1751-8679

[7]. R. T. Ugale, B. N. Chaudhari and A. Pramanik, "Overview of Research Evolution in the field of Line Start Permanent Magnet Synchronous Motors," IET Journal (Previously known as IEE Proceedings) Electric Power Applications, vol.8, Issue 4, pp.141-154, April 2014. DOI: 10.1049/iet-epa.2013.0241 , Print ISSN 1751-8660, Online ISSN 1751-8679

[8]. R. T. Ugale, B. N. Chaudhari, S. Baka and A. Pramanik, "A Hybrid Interior Rotor High Performance Line Start Permanent Magnet Synchronous Motor," Taylor & Francis Journal, Electric Power Components and Systems, vol. 42, Issue.9, pp.901-913, May, 2014.DOI: 10.1080/15325008.2014.903539, Print ISSN: 1532-5008, Online ISSN1532-5016.



PAPERS PUBLISHED IN INTERNATIONAL CONFERENCES: [25 Nos.]

[1].  S. S. Patil, R. T. Ugale, Arbind Kumar and S. S. Revalkar, "Design of line start linear permanent magnet synchronous motor for electromagnetic catapult”, presented in 46th Annual International conference of  IEEE Industrial Electronics Society (IES)- IECON 2020, Paper no. SD-017981, pp.1-6 , to be held at Singapore, during October 18-21, 2020. Electronic ISBN:978-1-7281-5414-5, USB ISBN:978-1-7281-5413-8, Print on Demand(PoD) ISBN:978-1-7281-5415-2, Electronic ISSN: 2577-1647, Print on Demand(PoD) ISSN: 1553-572X.

[2]. Abahy Kumar Awasthi, R. T. Ugale and Arbind Kumar, "ANN based robust control of linear induction motor”, presented in 46th Annual International conference of  IEEE Industrial Electronics Society (IES)- IECON 2020, Paper no. SD-016616, pp.1-6, to be held at Singapore, during October 18-21, 2020. Print on Demand(PoD) ISSN: 1553-572X, Electronic ISSN: 2577-1647, Electronic ISBN:978-1-7281-5414-5, USB ISBN:978-1-7281-5413-8, Print on Demand(PoD) ISBN:978-1-7281-5415-2.

[3]. Rutvij V. Deshpande, R. T. Ugale and Saurabh Nikam, " Performance analysis of PMSM based solar water pumping system interfaced at AC bus using novel control strategy," IEEE Region 10 Conference (TENCON 2019) held at Hotel Grand Hyatt, Kochi, Kerala, India during October 17-20, 2019. DOI: 10.1109/TENCON.2019.8929384

[4]. N. P. Raipure, R. T. Ugale and B. N. Chaudhari, " Solar powered BLDC motor drive for wide speed range electric vehicle application," 8th IEEE Power Electronics, Drives and Energy Systems (IEEE PEDES 2018) conference held at Indian Institute of Technology Madras (IITM), Chennai, India during December 18-21, 2018. DOI: 10.1109/PEDES.2018.8707929

[5]. R. T. Ugale, K. D. Mejari and B. N. Chaudhari, " Design of transformer with flexible vector group combinations and adjustable voltage levels," XXIIIrd International Conference on Electrical Machines (ICEM 2018) held at Alexandroupoli, Greece during September 3-6, 2018. DOI: 10.1109/ICELMACH.2018.8507157

[6]. R. T. Ugale, S. N. Gore and B. N. Chaudhari, " Web based remote and locally operated all in one electrical machine laboratory with data acquisition, fault diagnosis and protection," XXIIIrd International Conference on Electrical Machines (ICEM 2018) held at Alexandroupoli, Greece during September 3-6, 2018.DOI: 10.1109/ICELMACH.2018.8506977

[7]. B. A. Rathod, G. V. Havaldar, B. N. Chaudhari, P. M. Golatgaonkar and R. T. Ugale, " Design of polyphase outer rotor homopolar transverse flux machine using ferrite magnets and laminations," XXIIIrd International Conference on Electrical Machines (ICEM 2018) held at Alexandroupoli, Greece during September 3-6, 2018.DOI: 10.1109/ICELMACH.2018.8506931

[8]. P. M. Golatgaonkar, B. N. Chaudhari and R. T. Ugale, "Torque Ripple Reduction in a Homopolar Poly-phase Transverse Flux Machine", the IET 9th International Conference on Power Electronics, Machines and Drives (PEMD 2018), held at Liverpool ACC, Liverpool, UK, during April 17-19, 2018. DOI: 10.1049/joe.2018.8187

[9] R. T. Ugale and  Kunal B. Chavhan, "Web based automated electrical machine test bench with data acquisition and remote control”, Paper ID- 776, IEEE International conference on Power Electronics, Drives and Energy Systems (IEEE PEDES 2016), pp- 1-5,  held at Trivandrum, Kerala, India during 13-17 Dec. 2016.    DOI: 10.1109/PEDES.2016.7914511

[10]. Priyanka Bastawade, B. N. Chaudhari, R. T. Ugale and A. Pramanik, "Analytical and FEM based analysis of Homopolar poly-phase transverse flux machine”, Paper ID-576, IEEE International conference on Power Electronics, Drives and Energy Systems (IEEE PEDES 2016), pp. 1-6, held at Trivandrum, Kerala, India during 13-17 Dec. 2016.DOI: 10.1109/PEDES.2016.7914411

[11]. R. T. Ugale, Tushar Sambharam, B. N. Chaudhari and S. L. Patil, "Circuit model for conducted emissions analysis of integrated magnetic with thermal impact”, 42nd Annual International conference of Industrial Electronics Society - IECON 2016, pp. 1301-1306, held at Florence, Italy during 23-27 Oct. 2016. DOI: 10.1109/IECON.2016.7793410.

[12]. R. T. Ugale, K. D. Mejari and B. N. Chaudhari, "Analytical and FEM design of autotransformer with phase shifting capability”, XXIInd International Conference on Electrical Machines, ICEM 2016, held at Lausanne, Switzerland during Sept. 4-7, 2016, pp. 1345-1351, Sept. 2016, DOI: 10.1109/ICELMACH.2016.7732699.

[13]. Kunal B. Chavhan and R. T. Ugale, "Automated test bench for an induction motor using Lab View”, CD Proc., Paper ID- 1570270863, 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2016) held at Delhi Technological University, New Delhi, India during 3-7 July. 2016 pp.1-6. DOI:10.1109/ICPEICES.2016.7853547

[14]. Yogesh Mangalekar and R. T. Ugale, “Electric Motor Power Quality Assessment using LabView based Smart Power Quality Analyzer”, IEEE International Cnference on Recent Advances in Intelligenet Control and Systems (RAICS 2015), 3rd Int. Conf., CD Proc., held at Trivandrum, India, during Dec. 10-12, 2015. DOI: 10.1109/RAICS.2015.7488435.

[15]. Kedar Mejari and R. T. Ugale, "Solid sate Circuit Breaker based fault and load management in 22 kV power distribution system”, 9th International conference on Switchgear and Controlgear, SWICON 2015, held at The Hotel Lalit, Mumbai, during 26,27 Nov. 2015.  [ Organized by IEEMA and Supported by MHRD, TEQIP and IEC]. The authors received INR 11,000/- Award/Honorarium from the conference committee for research contributions.

[16].
G. S. Chingale and R. T. Ugale,Harmonic filter design for line start permanent magnet synchronous motor,CD Proc. of ICAEE’14, 1st Int. Conf. on Advances in Electrical Engineering held at School of Electrical Engineering, VIT University, Vellore, Tamil Nadu, India, during January 9-11, 2014. 
DOI: 10.1109/ICAEE.2014.6838503.

[17]. R. T. Ugale and B. N. Chaudhari and, “A new rotor structure for line start permanent magnet synchronous motor”, IEEE International Electrical Machines and Drives Conference - IEMDC 2013, pp. 1436-1442, held at Chicago USA, during 12-15 May, 2013. DOI: 10.1109/IEMDC.2013.6556326.

[18]. R. T. Ugale, S. K. Dond, B. N. Chaudhari and A. A. Tembe, “A low cost fast data acquisition system for capturing electric motor starting and dynamic load transients”, IEEE International Conference on Power Electronics, Drives and Energy Systems, (IEEE PEDES 2012), paper ID.260, pp. 1-6, held at Bengaluru, India, during Dec. 16-19, 2012.  DOI: 10.1109/PEDES.2012.6484484.

[19]. R. T. Ugale, B. N. Chaudhari and S.Baka, “Inset consequent and inset rotor line start permanent magnet synchronous motor,”  XXth International Conference on Electrical Machines (ICEM 2012), pp.333-338, held at Marseille, France, during, Sept. 2-5, 2012. DOI: 10.1109/ICElMach.2012.6349887.

[20]. R. T. Ugale, A. Bhanuji and B. N. Chaudhari, “A novel line start permanent magnet synchronous motor using two part rotor,” IEEE Region 10 Conference - TENCON 2009, 6th Int. Conf. CD Proc. paper no. 0643, pp. 1-5, held at Singapore, Nov. 23-26, 2009. DOI: 10.1109/TENCON.2009.5395857.

[21]. R. T. Ugale, G. Singh, S. Baka and B. N. Chaudhari, “Effective Energy Conservation for the Agricultural Sector using Line Start Permanent Magnet Synchronous Motors,” IEEE Region 10 Conference - TENCON 2009,6th Int. Conf.CD Proc. paper no. 0758, pp. 1-5, held at Singapore, Nov. 23-26, 2009. DOI: 10.1109/TENCON.2009.5395904.

[22]. V. Fating, S. V. Jadhav, R. T. Ugale and B. N. Chaudhari, "Direct torque control of Symmetrical and Asymmetrical Single phase Induction Motor", 6th International Conference POWERCON 2008 IEEE Power India, Track-Electrical Drives, pp.1-4, held at New Delhi, India, during Oct. 12-15 2008. DOI: 10.1109/ICPST.2008.4745327.

[23]. R. T. Ugale, V. Nagabhushan, B. N. Chaudhari and N. R. Bhasme, "Behavior of Line Start Permanent Magnet Synchronous Motor Under Short Power Interruptions", 6th International Conference POWERCON 2008 IEEE Power India, Track-Electrical Drives, pp.1-5, held at New Delhi, India, during Oct. 12-15 2008. DOI: 10.1109/ICPST.2008.4745328.

[24]. R. T. Ugale and B. N. Chaudhari, "Effect of Short Power Interruptions on Performance of AC Motors", Permanent Magnet Machines Track - IEEE International Conference on Industrial Technology - ICIT 2008, pp. 1-5, held at Sichuan University, Chengdu, China during April 21-24, 2008. DOI: 10.1109/ICIT.2008.4608323.

[25]. R. T. Ugale, Y. Balakrishna and B. N. Chaudhari, “Effects of short power interruptions and voltage sags on the performance of line start permanent magnet synchronous motor,” The IET 4th International Conference on Power Electronics, Machines and Drives (PEMD 2008), IEEE, PES, IAS sponsored Conference Proceeding, pp.1 84-188, held at  St. John. University, York, UK, April 2-4.,2008. DOI: 10.1049/cp:20080508.


PAPERS PUBLISHED IN NATIONAL CONFERENCES: [ 11 Nos.]

[1]. Payal Hake, Rajaram T Ugale, "Solar PV and Grid Interfaced BLDC Motor Drive System for Agricultural Pump Applicatioon," Proc. of 10th National Power Electronics Conference 2021 (NPEC 2021), pp. 01-06, held at Indian Institute of Bhubaneswar [IITBBS], India during December 15-17, 2021.DOI: 10.1109/NPEC52100.2021.9672516

[2]. Snehal Chothe, Rajaram T Ugale, Ameya Gambhir, "Design and modeling of Phase Shifted Full bridge DC-DC Converter with ZVS," Proc. of 10th National Power Electronics Conference 2021 (NPEC 2021), pp. 01-06, held at Indian Institute of Bhubaneswar [IITBBS], India, during December 15-17, 2021.DOI: 10.1109/NPEC52100.2021.9672529

[3]. Dattu B. Pawar, Muhammed Abuzar Ansari, Rajaram T. Ugale, Atul Jain, "Design, Development and Performance Analysis of Permanent Magnet Flywheel Magneto with Regulator Rectifier", Proc. of 10th National Power Electronics Conference 2021 (NPEC 2021), pp. 01-06, held at Indian Institute of Bhubaneswar [IITBBS],India, during December 15-17, 2021.DOI: 10.1109/NPEC52100.2021.9672506

[4]. A. A. Reddy, S. S. Bhat and R. T. Ugale, "Design and FEM Analysis of dual excited synchronous generator," Proc. of 8th National Power Electronics Conference 2017 (NPEC 2017), pp. 302-306, held at College of Engineering Pune [COEP] during December 18-20, 2017DOI: 10.1109/NPEC.2017.8310475

[5]. R. T. Ugale and B. N. Chaudhari, "Development of Line start PMSM at COEP," National level ‘Research Scholar’s Conclave” organized by CoE SRES and CoE S&IP at College of Engineering Pune [COEP] under TEQIP grants held during March 24-25, 2017.

[6]. Shinto Antony, R. T. Ugale, M. M. Kane and Naga Chaithanya, "Design of auxiliary BLDC motor for 48 V EV/EHV environment", CD Proc., 2014 ANSYS CONVERGENCE Conferences, held at Pune, India on May 6, 2014.

[7]. Ponnuru Ch K Chaitanya, R. T. Ugale and B. N. Chaudhari, "Design and development of Brushless DC Motor for Textile Industry application," CD Proc., 2014 ANSYS CONVERGENCE Conferences, held at Pune, India 
on May 6, 2014.

[8]. Vaibhav Kadam, R. T. Ugale and B. N. Chaudhari, "Design and development of Switched reluctance motor for Textile Mill application," CD Proc., 2014 ANSYS CONVERGENCE Conferences, held at Pune, India 
on May 6, 2014.

[9]. V. Nagabhushan Rao and R. T. Ugale; Effect of Short Power Interruptions on the Performance of Line Start Permanent Magnet synchronous Motor", National Level Technical Symposium, PRAGNYA'08, held at JNTU COE, Hyderabad, India
during March 3-4, 2008. The paper selected as "Best Paper" and received first prize in the conference.

[10]. R. T. Ugale and B. N.Chaudhari, "Behavior of Line Start Permanent Magnet Synchronous Motor under Unbalanced Supply", Energy conversion - PCID-2008, Fourth National Conference on Cutting edge technology on Power Conversion and Industrial Drives held at Bannari Amman Institute of Technology, Sathyamangalam, (Erode); Tamilnadu during Feb. 22-23, 2008.

[11]. R. T. Ugale, Y. Balakrishna and B. N. Chaudhari, "Modeling and Simulation of Line start Permanent Magnet Synchronous Motor", PM Machines - NUCONE-2007, Second National Conference on Current trends in Technology held at Nirma Institute of Technology, Ahmedabad, Gujarat during 29 Nov-1 Dec 2007.

 

Ph. D. Students working with me under my Supervision: 03 nos

[1]. Priyanka Golatgaonkar [Roll no. 23490003] working on a Ph. D. research topic, “Design and Analysis of Transverse Flux Permanent Magnet Machine”, Date of Admission 24/08/2014. Candidate has completed the research work and has submitted the Ph. D. thesis in Jan 2022.

[2]. Renu Deepak Saxena, working on a research topic “Design and Performance Analysis of Line Start Permanent Magnet Synchronous Motor”, admitted in 2020-2021, registered for Ph. D. on 07/03/2020.

[3]. Sagar P. Burud, working on a research topic, “Design Analysis and Development of Exterior Rotor Line Start Permanent Magnet Synchronous Motor”, admitted in 2021-22. Date of Registration 08/03/2021.

 

PATENTS: [4 Nos.]
PATENTS GRANTED/AWARDED: [02 ]

[1]. B. N. Chaudhari, R. T. Ugale and S. Baka “Hybrid excited rotor structures for line start permanent magnet synchronous motors”, Patent. Appl. No.3621/MUM/2012, Dec.26, 2012, filled at patent office, Mumbai. Granted for 20 years. Indian Patent No.374267, Patent Grant date- 11/08/2021.

[2]. B. N. Chaudhari and R. T. Ugale, “Rotor structures for permanent magnet synchronous motors”, Patent. Appl. No. 569/MUM/2012, March 2, 2012, filled at patent office, Mumbai.   Granted for 20 years, Indian Patent No.327030, Patent Grant date- 09/12/2019.

PATENTS UNDER EXAMINATION: [02]

[1]. Bhalchandra N. Chaudhari, Priyanka Bastawade, R. T. Ugale, Bhavesh Rathod  and Gautam Hawaldar, “An Outer rotor Permanent Magnet Polyphase Transverse Flux Machine”, Patent. Appl. No. 201821014397, Date- 16/04/2018, filled at patent office, Mumbai.

[2]. Bhalchandra N. Chaudhari, Bhavesh Rathod, Gautam Hawaldar, Priyanka Bastawade, R. T. Ugale,   “ An Outer Rotor Hybrid excited Polyphase Transverse Flux Machine”, Patent. Appl. No. 201821014396, Date- 16/04/2018, filled at patent office, Mumbai.



EXPERT TALKS: [ 16 Nos.]

[1]. Talk on “Electric Motors for Electrical Vehicles”, in an Online ATAL FDP on “Power Electronics and it’s Control in Electric Mobility and Energy Storage” arranged for Faculty and Research students by Electrical Engineering Department, College of Engineering, Pune during 17 to 21 Jan 2022, delivered on 17 Jan 2022.

[2]. Talk on “Design of BLDC Motor Drive System”, in a 3 day Online Work shop on “Design of Electric Vehicle using Software” arranged for UG/PG students and Faculty by Electrical Engineering Department, Modern College of Engineering, Pune during 7 to 9 Oct 2021, delivered on 8 Oct 2021.

[3]. Talk on "Design Aspects of Special Lilear Electrical Machines", in One Week CEP programme arranged for DRDO Scientists during 14 - 18 Oct. 2019 held at DRDO R&D (Engrs), Kalas, Pune, talk delivered on 16 Oct. 2019.

[4]. Talk on "Modeling, Control and FEA design of BLDC motors", in two days National Level Workshop on "Computer Aided Techniques in Electrical Machines and Power Electronic Drives", held during 12 and 13 Feb. 2019, organized by Electrical Engineering Department, PES's MCOE, Shivajinagar, Pune, delivered on 12 Feb. 2019.

[4]. Talk on "Exploring Quality Research and Publications in Academics", in a" Faculty Development Programme (FDP)", held at Jai Hind COE, Kuran, Junnar, Pune, delivered on 09 Feb. 2019.

[6]. Talk on "Advances in Electric Motor Drives for Electric Vehicle (EV) and Hybrid Electric Vehicle (HEV) Automotive Application", in two days State level Workshop on "Recent Challenges in Electric and Hybrid Vehicles", held during 03 and 04 Jan. 2019, organized by Electrical Engineering Department, TSSM's BSCOER NTC, Narhe, Pune, delivered on 3 Jan. 2019.

[7]. Talk on "Modern BLDC and PMSM Drives", in one week (24 to 28 April 2018) STTP on "Recent trends in Electrical Power System and Modern Electrical Drives and its Control", organized by Electrical Engineering Department  SBP COE Indapur, Tal Indapur, Dist. Pune, delivered on 24 April 2018.

[8]. Talk on "Electrical Machine Design using FEA", at GHRCOEM, Chas, Ahmadnagar for TY and B. Tech. Electrical Engineering students, delivered on 29 March 2018.

[9]..Talk on "Electrical Machine Design using FEA", at AISSMS COE, Pune for TY Electrical Engineering students, delivered on 27 March 2018.

[10]. Conference Tutorial  on "Electric Drives for Electrical Vehicles ", delivered in National Conference on Electrifying Experiences on Electrical Transportation in India (NCEEETI 2018) organized by G. H. Raisoni Institute of Engineering and Technology, Wagholi, Pune, during 05-07 February, 2018.

[11]. Talk on "Energy Efficient Motors and Multiphysics FEA based Machine Design", delivered in a Three days State Level Student Development Programme (SDP) -"Knowledge Fare"  held at SBP COE, Indapur, Tal. Indapur, Dist. Pune, during 11-13 January 2018.

[12]. Talk on topic "R-L-C Circuit components in Representation of Electrical Devices and Installations with Practial Examples", at Jaihind  College of Engineering, Kuran, Tal. Junnar, Dist. Pune delivered on 16th November, 2017.

[13]. Talk on topic "Research on Electrical Machines at COEP", delivered on 25th March 2017, in Two days National Level Research Scholar Conclave jointly held by 'Center of Excellences (CoE - SIP & SRES)' at College of Engineering Pune during 24th and 25th March, 2017.

[14]. Talk on "Permanent Magnet Machines and Advanced Drives", in National level workshop on Emerging Trends in Electrical Engineering" held at Electrical Engg. Dept., Zeal College of Engg. and Research, Narhe Ambegaon, Pune. Sponsored by Savitribai Phule Pune University, Pune, during 11th - 13th January, 2017.

[15]. Talk and Demonstration on, "Energy Efficient Motors and Web based Testing of Electrical Machines", in One week Faculty Development Programme (FDP) on "Modern practices in Energy  Systems and Management", held at Electrical Engineering Department, College  of Engineering Pune, during May 30- June 03, 2016.

[16]. Talk on "Energy efficient motors- Development of Line start PMSM for Energy Savings", in a One day seminar on "Energy Efficient College campuses", held at College of Enggineering Pune [COEP] in association with Princeton University USA and TERIE France on June 1, 2013.

Memberships and Affiliations: 

[1]. Life member ISTE (LM 34041) of “The Indian Society for Technical Education”, since 2002, an organization for promoting the quality and standards in technical education.

[2]. Member of IEEE- for 2014 [Membership no.92947392], 2015 [Membership no.93467567 Dated 11 May 2015, and continued for 2016, 2017, 2018,2019, 2020,2021, 2022]. For 2022: Member of IEEE Industry Application Society and IEEE Industrial Electronics Society.

[3]. SAEINDIA Member, Membership no. 7200510140 from 01/02/2020 to 31/01/2023.

Current Projects : 

RESEARCH PROJECTS & GRANTS:

Ongoing Research Projects and Grants: [04 Nos]

[1]. Received Rs.4.936 Lakh from College of Engineering Pune for Interdisciplinary Minor Research Project on, “Design and development of permanent magnet synchronous motor drive system with normal and reverse saliency for electric vehicle application”. Project sanction letter no.COEP/Rand D/IDMRP/5 Date. 20/08/2021. [PI- R. T. Ugale, Co-PI- U. M. Chaskar]

[2]. Received Rs.4.9 Lakh from College of Engineering Pune for Interdisciplinary Minor Reserch Proect on, “Design and development of resistance heating nitriding furnace”. Project no. COEP/2020/IMRP/PGR-RTU/09, 2020. [PI- P. R. Ranaware, CoPI- R. T. Ugale]

[3]. Received a grant of Rs.9.30 Lakhs from R&D (Engrs), DRDO, Pune for the research project “Comparative study of various configurations of linear Electrical Machines and design and analysis of linear permanent magnet synchronous motor (LPMSM) for Electromagnetic Launch Systems”. File. No. RDE/EMSG/CARS/2019-20/18 (T21978) Date:17/12/2019, [PI- R. T. Ugale, Co-PIs- S. S. Dambhare and N. K. Chaougule]

[4]. Received a grant of Rs.10.00 Lakhs from AICTE - RPS Project on “Development of a novel, energy efficient, field assisted, brushless, and permanent magnet synchronous motor (PMSM) for agricultural pumps”. File. No. 8023/RID/RPS-38(POLICY-III)(GOVT)/2011-12, May 09, 2012. [PI- R. T. Ugale]


Completed Research Projects and Grants: [01 Nos]
[1]. Received a grant of Rs.17.22 Lakhs from AICTE - RPS Project “Design and prototype development of low and medium power permanent magnet synchronous motors for speed dependent loads”. File. No. 8023/BOR/RID/RPS-75/2007-08, June 24, 2008. [PI- Dr. B. N. Chaudhari, Co-PI- R. T. Ugale] `

© 2022 COEP. All Rights Reserved. Site Developed By COEP Webteam.

© 2016 College of Engineering Pune. All rights reserved